install Repetier di ubuntu?

Repetier sudah diinstall di ubuntu, usb nya belum berfungsi.

lsusb

Bus 003 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 003 Device 007: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 003 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 0bda:57b5 Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

lsusb -D /dev/bus/usb/003/007

Device: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0403 Future Technology Devices International, Ltd
idProduct 0x6001 FT232 USB-Serial (UART) IC
bcdDevice 6.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 90mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 2
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0

Kalau dari ID:0403:6001 mestinya usb sudah dikenal oleh sistem. Tapi setelah tombol connect ditekan aplikasinya langsung exut sendiri.

Halo linuxer yang baik hati...
Caranya memfungsikan USB nya bagaimana ?

Edited 1 time(s). Last edit at 11/28/2015 07:31AM by Hendri_jb.

Saya pake XUBUNTU, entah kenapa langsung bisa gan, tapi kalo exit sendiri emang sering juga. Misal lagi ubah transformasi benda stlnya tiba2 nutup. Trus kalo connect tapi usb portnya salah juga nutup.

Quote
ryannining
Saya pake XUBUNTU, entah kenapa langsung bisa gan, tapi kalo exit sendiri emang sering juga. Misal lagi ubah transformasi benda stlnya tiba2 nutup. Trus kalo connect tapi usb portnya salah juga pnutup.

Persis, jadi balik lagi ke windows deh...