Poker-working device
Posted by Assargadon
|
Poker-working device February 09, 2008 07:44AM |
Registered: 17 years ago Posts: 58 |
As I told before, my crafting skills are poor.
So, to have some practics, I going to make poker-device from my cartesian robot. It's lokks quite simple, as far as I have old but still working poker-working unit.
All I need is attach it to robot and provide all this with appropriate software. I don't yet know if this software alredy maked or I should make it by myself.
So, to have some practics, I going to make poker-device from my cartesian robot. It's lokks quite simple, as far as I have old but still working poker-working unit.
All I need is attach it to robot and provide all this with appropriate software. I don't yet know if this software alredy maked or I should make it by myself.
|
Re: Poker-working device February 09, 2008 11:57PM |
Admin Registered: 17 years ago Posts: 1,791 |
Look at emc, a realtime linux based machine controller.
[www.linuxcnc.org]
It will be easy if your robot is controlled by a parallel port, with a simple protocol like "wire 1 (HI/LO) indicates (+X/-X) direction for the x-axis, wire 2 pulses mean move one step on X, etc."
If your robot requires something more complicated, you may be able to get emc to do it.
[www.linuxcnc.org]
It will be easy if your robot is controlled by a parallel port, with a simple protocol like "wire 1 (HI/LO) indicates (+X/-X) direction for the x-axis, wire 2 pulses mean move one step on X, etc."
If your robot requires something more complicated, you may be able to get emc to do it.
|
Re: Poker-working device February 10, 2008 03:22AM |
Registered: 17 years ago Posts: 58 |
|
Re: Poker-working device February 10, 2008 08:25PM |
Admin Registered: 17 years ago Posts: 1,791 |
I think there are some people doing work with usb and emc, but we went with a java-based driver in order to run on anything.
If it was just you or me doing this, it would probably be in C using the parallel port in linux. Since we want most of the world using these machines, we need to make compromises.
If it was just you or me doing this, it would probably be in C using the parallel port in linux. Since we want most of the world using these machines, we need to make compromises.
|
Re: Poker-working device January 20, 2009 05:16PM |
Sorry, only registered users may post in this forum.