Welcome! Log In Create A New Profile

Advanced

Where can you get PLA?

Posted by ziplock 
Where can you get PLA?
October 25, 2009 06:24PM
It seems that PLA is the ideal material to use when printing (Nophead's posts seem to lend truth to that, and IIRC it's the official RepRap plastic).

Where can you buy it?

PLA doesn't seem to available anywhere. Makerbot doesn't have it, and BitsFromBytes doesn't either. Where can you get PLA???
Re: Where can you get PLA?
October 25, 2009 08:38PM
Vik Olliver in New Zealand appears to be the local supplier here.
I believe Adrian is a local supplier in the UK
Re: Where can you get PLA?
October 25, 2009 08:48PM
Does anyone supply PLA in the U.S.?

-Adam
Re: Where can you get PLA?
October 30, 2009 12:38PM
BFB has PLA in three colours, Clear, red and blue
Re: Where can you get PLA?
October 30, 2009 09:03PM
Tofletcher, I don't see where BfB carries PLA.

-Adam
Re: Where can you get PLA?
October 31, 2009 02:42PM
Its new stock, might not be on the site, drop them an e-mail, I had some transparent Red from them.
Tony.
Re: Where can you get PLA?
November 01, 2009 08:43PM
Tony, thanks for the tip! It's time to play (pardon the pun)!

-Adam
Re: Where can you get PLA?
November 02, 2009 10:29AM
Greetings all,

I haven't heard anything about a US supplier for PLA, so I did a little digging.
This website lists some suppliers:
[www.ides.com]

I emailed two of the US suppliers (Ashland and Jamplast), who both source NatureWorks Ingeo brand of PLA in the US:
[www.natureworksllc.com]

I believe they supply in granule form, so we'd need somebody (New Image?) to make it into 3 mm rod.

Is anybody else looking into this (Zach & Co. at Makerbot?) I'd prefer not to duplicate efforts (or cost) of a test batch and I'mm happy to share whaterver info I get.

Edited 1 time(s). Last edit at 11/04/2009 07:42AM by Larry_Pfeffer.


Larry Pfeffer,

My blog about building repstrap Cerberus:
[repstrap-cerberus.blogspot.com]
Re: Where can you get PLA?
November 03, 2009 05:36PM
Greetings all,

I've heard back from the two US suppliers of Ingeo brand PLA resin I contacted. I have preliminary pricing, which varies by resin type and grade.
In small quantities (under a pallet, ~~ 1600 lbs) The more expensive resin *granules*, would cost approx $1.88 / lb (at the factory dock) and the lower-cost material is $1.30 / lb.

At these prices, the cost of shipping (granules), extruding and re-shipping (spools of rod) will likely dominate the pricing. However, if we were to order in sufficient quantities, I hope the cost would be similar to ABS, or maybe slightly less. I have asked the folks at New Image Plastics to look at a couple of the PLA datasheets, and let me know if they can extrude a test batch, and please let me know how much that'd cost. So far, they've been quite responsive, and I have my fingers crossed. I'll report back what I learn from them.
Has anybody reading this worked with any other welding-rod manufacturers in the US? Similarly, would anybody else in the US be interested in sharing the cost of a test batch, in exchange for early access to material from the test batch(es)?

I'd rather not get into the welding-rod supply business (except to kick-start a US supply of PLA), so I also queried Makerbot.com (via contact-form email), to see if they'd be interested in carrying PLA welding rod as a product.


Larry Pfeffer,

My blog about building repstrap Cerberus:
[repstrap-cerberus.blogspot.com]
Re: Where can you get PLA?
November 03, 2009 10:52PM
Hi Larry

If we can get PLA into a bunch of High Schools based on the fact that it is biodegradeable we can build up the volumn.
Re: Where can you get PLA?
November 04, 2009 10:40PM
Hey guys, I just had a couple test runs of PLA successfully here in USA and am setting up a store to sell it.

The first run went to several of the old heads here in the Western Hemisphere and they approved so far smiling smiley

I have a large batch being being shipped to the fillament extruder as of last week, and should be able to ship 5lb rolls by the end of the month at the latest.

The website is not very pretty right now, still being thrown together. If you are interested you can email me at johnny at ultimachine. Or through the site UltiMachine.com

Johnny
Re: Where can you get PLA?
November 08, 2009 06:16PM
Hi all,

sorry for the delay in getting it up onto our site but Bits From Bytes do indeed have stocks of PLA in translucent colours (red, yellow, green and blue) smiling smiley It costs £47/kg and we can ship world wide. If anyone needs more help or wants to know shipping costs to them please just drop me a line at sales@bitsfrombytes.com

Best regards,

Iain Major
Bits From Bytes Ltd
Re: Where can you get PLA?
November 11, 2009 04:02PM
This is great Johnny, I can't wait till you get up and running.


----
[www.binaryconstruct.com]
Re: Where can you get PLA?
February 22, 2010 12:57PM
How about here?
[ultimachine.com]
I just ordered a 5 lb roll of PLA in natural color, should be here today.


Cameron

Help improve the RepRap wiki!
Just click "Edit" in the top-right corner of the page and start typing.
Anyone can edit the wiki!
Sorry, only registered users may post in this forum.

Click here to login