How to adjust UV resin viscosity ??

Hello
Please I need help

I have uv resin the viscosity is 3000 CPS ,I need to adjust the viscosity of resin to be 250 CPS How can I do this
without any change in chemical properties ?

THANK YOU

... without a solvent only heating can reduce viscosity - but above 60degC the composition can change, so the curing parameters will change too ...

---

Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]

Hi, I really thank you for this information, what is your Recommends

About the best solvent for UV-cured liquid acrylic urethane methacrylate adhesive , has no negative effect on chemical composition , less odor, clear
Also if I use heating The resin will return to the same first viscosity when it completely cools ?
Is there any custom machine to reducing the viscosity?

thank you so much

Edited 1 time(s). Last edit at 07/06/2017 12:16AM by EGPMAX.

... depending on cmposition, temperatures below 55degC won't change the behaviour after cooling down.

I'm printing (jetting) pastes with even higher viscosities, but the valve with controller is pretty expensive (around 8000€)

Here some videos, showing the "printing" and the results:

[vimeo.com]

[vimeo.com]

[vimeo.com]

[vimeo.com]

---

Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]