Please
CLICK HERE for more information regarding this product and to purchase:
This is a
RepRap Mini Mendel "Huxley" Unassembled 3D Printer Kit based off the BOM list from RepRap. This includes all except for the plastic parts.
3 x NEMA 14 Motors
1 x Kysan NEMA 17 Motor
9Ft of Smooth rods
6Ft of Threaded rods
M6 Locking Nuts (bag of 100)
M6 Nuts (bag of 100)
M3 Nuts (bag of 100)
2 x 626 Bearing
30 x 626 Bearing
M6 Mudguard washers (bag of 50)
M3 Steel Washers (bag of 200)
M6 Steel Washers (bag of 100)
1 x Timing Belt
1 x Continuous Timing Belt
1 x Extruder Heater Barrel
1 x PTFE Insulator
1 x Nozzle
1 x Kapton tape (full roll)
1 x Universal Power Supply
1 x Nichrome wire 5ft
1 x Bowden cable 3ft
1 x FTDI basic breakout – 5V
1 x Arduino MEGA
1 x Pololu A4983 Extruder Controller
4 x Pololu A4983 Stepper Motor Controllers
4 x SMD colling fin
Thick Sheets (made out of wood)
Some various additional components, wire, solder, ribbon, cable, etc may be needed for this experimental reprap kit. We will soon list those on the BotMill store as well.
Lead time is 1-3 weeks
Due to rod dimensions, this kit is shipped in two USPS boxes.
Click Here to View Product
