Join us to build your own RepRap. We think that we have to aproach people as fast as possible to RepRap printers. So that, we invite you to our monthly workshop.
With that workshop you will obtain a complete RepRap prusa kit that you will build with us in our facilities.
You will learn how RepRap works and some tricks to improve your machine. You also are going to be taught about how to find improvements and have new ideas for your machine. At the end, of course, the machine will be yours!
The workshop will take place during the next days:
Friday 25th of May from 15h to 20h.
Saturday 26th of May from 9h to 14h and 15h to 20h
Sunday 27th of May from 9h to 14h and 15h to 20h
The machine that will be your is a Prusa Mendel with some improvements. Its main features are:
Hardware:
Full equiped LM8UU axis.
SLS pulleys and belt T2,5
SLS Printed X axis from [
www.thingiverse.com] thanks to [
www.thingiverse.com]
Extruder
Full equiped SLS printed Greg's extruder with Hot End V5 (redesign from RepRapBCN).
Electronics:
Ramps 1.4 electronics.
All the wiring is ready, you don't need to prepare it during the workshop.
Hot bed:
2 Sheets in aluminium and glass surface as a printing surface
All the wiring is ready.
Software:
You will learn how to burn firmware on your Arduino and how to set up your machine.
You will install and learn all you need to run Slic3r and printerface.
After the workshop you will be ready to print and to join the REPRAP community.
Contact us in
info@reprapbcn.com to make suggestions or to get more info.
The language will be Spanish & English
[
www.reprapbcn.com]
Edited 1 time(s). Last edit at 05/12/2012 08:34AM by RepRapBCN.
RepRapBCN - Barcelona Tech - Universitat Politècnica de Catalunya
Visit our
Webstore -
Blog -
Facebook
