[US] Fully assembled tuned and ready to print RepRap X2 dual extruding 3D printer S/N# x2_0203
Posted by dob71
|
[US] Fully assembled tuned and ready to print RepRap X2 dual extruding 3D printer S/N# x2_0203 October 31, 2012 02:35AM |
RepRap X2 is a dual extruding 3D printer. The hardware is based on Prusa's Mendel. Click here for an overview. Click here to find RepRap X2 on eBay.
The printer is shipped fully assembled and is ready to print pretty much out of the box. The detailed specs as well as the test prints pictures and videos are provided on the eBay listing pages.
The dual extrusion capable Marlin for X2 firmware is pre-loaded and pre-configured. The X2SW host software toolchain bundle can be installed in minutes and is pre-packaged with the custom profiles for the printer.
Edited 2 time(s). Last edit at 10/31/2012 03:02AM by dob71.
The printer is shipped fully assembled and is ready to print pretty much out of the box. The detailed specs as well as the test prints pictures and videos are provided on the eBay listing pages.
The dual extrusion capable Marlin for X2 firmware is pre-loaded and pre-configured. The X2SW host software toolchain bundle can be installed in minutes and is pre-packaged with the custom profiles for the printer.
Edited 2 time(s). Last edit at 10/31/2012 03:02AM by dob71.
|
Re: [US] Fully assembled tuned and ready to print RepRap X2 dual extruding 3D printer S/N# x2_0203 January 23, 2013 02:27AM |
RepRap X2 S/N# x2_0205 has been listed on e-bay (http://www.ebay.com/sch/dob_71/m.html).
The machine has been tuned using X2SW v1.1.0.6 (http://github.com/dob71/x2swn/wiki). The software comes with generic profiles for printing at the layer height as low as 0.1mm.
See the e-bay listing for more details, videos and pictures of the machine and the test prints.
The machine has been tuned using X2SW v1.1.0.6 (http://github.com/dob71/x2swn/wiki). The software comes with generic profiles for printing at the layer height as low as 0.1mm.
See the e-bay listing for more details, videos and pictures of the machine and the test prints.
Sorry, only registered users may post in this forum.