Welcome! Log In Create A New Profile

Advanced

Machined Extruder Parts

Posted by reifsnyderb 
Re: Machined Extruder Parts
November 02, 2009 09:41AM
Hello,

Sorry about the late reply.

I still have some extruder parts kits and, if there is enough interest, can make as many as required.

The parts kit, that is available, is for the direct-drive version of the extruder 1.1 (http://reprap.org/bin/view/Main/RepRapOneDarwinThermoplastExtruder).

However, I can make parts for the newer version, if there is interest.

Regards,

Brian
Re: Machined Extruder Parts
November 07, 2009 12:01PM
Hey! I am also interested, if you could add me to the list. I don't have a working machine so ill just be paying cash. Let me know if you are still making these kits!. pfuschendennarr@gmail.com
Re: Machined Extruder Parts
November 09, 2009 08:46AM
Hello,

I may be making extruder 2.0 kits, if I have enough interest for 10 kits.

Regards,

Brian
Re: Machined Extruder Parts
November 09, 2009 06:14PM
Postee in the other thread.. I'd buy the plastruder from you.

When?
pf
Re: Machined Extruder Parts
January 03, 2010 05:53AM
Brian-

are you offering version 2 darwin printed parts by any chance?

-Peter
Re: Machined Extruder Parts
January 03, 2010 12:54PM
Hello,

Unfortunately, I don't have any darwin printed parts available. I have been thinking about making some parts out of acrylic, plastic, etc.; but, I haven't had a chance to look closely at the files.

Regards,

Brian



pf Wrote:
-------------------------------------------------------
> Brian-
>
> are you offering version 2 darwin printed parts by
> any chance?
>
> -Peter
Re: Machined Extruder Parts
January 28, 2010 03:55PM
Hi Brian,

Are you still in business? If so, I'd like to get a full direct-drive kit. I notice you haven't been quite as ... talkative ... lately. How far behind have you gotten? ;^>

Thanks,
-Tom
Re: Machined Extruder Parts
January 29, 2010 10:19AM
Hello,

I am still here making parts and have a small inventory of them. Here is my latest thread: [dev.forums.reprap.org]

The new design takes fewer machined parts and uses a pinch-wheel design. However, If you really want the old kit (as this thread was for) I still have some parts for it. I would highly recommend the new kit, though. (The thread for the new kit is at: [dev.forums.reprap.org])

Regards,

Brian


tommcq Wrote:
-------------------------------------------------------
> Hi Brian,
>
> Are you still in business? If so, I'd like to get
> a full direct-drive kit. I notice you haven't
> been quite as ... talkative ... lately. How far
> behind have you gotten? ;^>
>
> Thanks,
> -Tom
PKV
PKV
October 01, 2010 10:42AM
the valuable info u provided do help the research for our company, thanks.

- Lucas
Sorry, only registered users may post in this forum.

Click here to login