HI..

I have far too many projects on the go so I have decided to let some go.

I'm selling my Kossel frame.
You will get the following.

Set of printed parts in PLA green
Alum ext (15x15) 600mm
Hardware (nuts/bolts/washers)
Bearing.623 and 608 supplied and fitted
6 x 250mm arm made up of traxx ball joints and M4 allthread (will supply GF tube if needed)
Airtriper extruder (included is the 608 and 5mm bearing for the stepper)
microswitches for endstops



Asking price $200.00 AU plus postage. Ship worldwide.

Ali you need to finish is motors, electrics and hotend.

If intrested please e-mail me at auzzemit at gmail dot com

[dl.dropbox.com]
[dl.dropbox.com]
[dl.dropbox.com]
[dl.dropbox.com]
[dl.dropbox.com]
[dl.dropbox.com]

Thanks
Auzze

Hi Auzze,

I have a Prusa Mendel and I would be interested in upgrading to a Kossel. As far as I could see I would need your parts, plus a circular glass, belts and that is it. Any other parts you can think of?
I am trying to estimate how much money I will have to invest to make the upgrade.

---

Cheers,
Franklin Dattein

HI..

No belts are used as you use fishing line which is included,
All you need is motors, hotend and electronics. As for the printbed I was going to use a piece of square MDF and screw it to the almu ext.
[dl.dropbox.com]
Plus a Mk7 pinch wheel for the extruder and springs.

Thanks
Auzze

Edited 1 time(s). Last edit at 03/05/2013 08:49PM by Auzze.

Sold