Welcome! Log In Create A New Profile

Advanced

Mendel Machined Extruder Parts Kit (Extruder Version 2.0)

Posted by reifsnyderb 
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
January 30, 2010 05:20PM
PM sent.

mostley Wrote:
-------------------------------------------------------
> Hi I'm interested in a kit as well.
>
> thanks
> Sven
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
January 30, 2010 05:23PM
E-mail sent.

Regards,

Brian

Niels Wrote:
-------------------------------------------------------
> Hello,
>
> I'm from the Netherlands, Europe, and I'm
> interestend in one set (PTFE). Could you email me
> te costs for the parts and shipping? My email is
> Nielsvanrijn at hotmail dot com.
>
> Thanks,
>
> Niels
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
January 30, 2010 06:10PM
Hi

I am interested in a kit

Thanks

Martin
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
January 31, 2010 11:05AM
PM sent.

Regards,

Brian


MartinB Wrote:
-------------------------------------------------------
> Hi
>
> I am interested in a kit
>
> Thanks
>
> Martin
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 03, 2010 01:47AM
Hi,

I am interested in a kit too.
Keep me inform of you next production schedule.
tks
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 03, 2010 08:55AM
netwarrior Wrote:
-------------------------------------------------------
> Hi,
>
> I am interested in a kit too.
> Keep me inform of you next production schedule.
> tks


PM sent.
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 03, 2010 10:28AM
Hey,

If there are any left I am interested in the kit.

Thanks

-- Chris
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 03, 2010 10:58AM
E-mail sent. (Replied to.)

Regards,

Brian


krafter Wrote:
-------------------------------------------------------
> Hey,
>
> If there are any left I am interested in the
> kit.
>
> Thanks
>
> -- Chris
Yes, I'm interested - jcw at equi4 dot com
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 03, 2010 04:21PM
Jean-Claude Wippler Wrote:
-------------------------------------------------------
> Yes, I'm interested - jcw at equi4 dot com


E-mail sent.

Regards,

Brian
Hey Brian,

Is it possible to get a 2.0 extruder kit from you at this time?
If not, could you offer an eta for your next batch?

thanks
Robert
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 04, 2010 08:51AM
E-mail sent.



Robert LaMarca Wrote:
-------------------------------------------------------
> Hey Brian,
>
> Is it possible to get a 2.0 extruder kit from you
> at this time?
> If not, could you offer an eta for your next
> batch?
>
> thanks
> Robert
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 04, 2010 11:25AM
I'd like to get two kits, one .5 and one .3mm if you still can, thanks!
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 04, 2010 06:59PM
PM Sent.

Regards,

Brian


Chorca Wrote:
-------------------------------------------------------
> I'd like to get two kits, one .5 and one .3mm if
> you still can, thanks!
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 08, 2010 09:21AM
btt
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 09, 2010 06:43PM
Just wanted to say that I just got the extruder nozzle today, and the quality is great! The machining is very well done. Wiped it off with a paper towel and took these pics so everyone can see just what reifsnyderb is selling!

These are of the 0.5mm nozzle. If people want pictures of the tip of the 0.3mm one I'll take more.

Click on the pics to see bigger ones..




Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 13, 2010 10:37AM
Hi I would be interested in a 0.3 mm and a 0.5mm, if possible

thanks
Gordon
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 13, 2010 01:37PM
PM Sent

goraxe Wrote:
-------------------------------------------------------
> Hi I would be interested in a 0.3 mm and a 0.5mm,
> if possible
>
> thanks
> Gordon
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 13, 2010 01:53PM
Brian,

I am interested in two sets. Both PTFE. One with the 0.5mm orifice, one with the 0.3mm orifice. I am in Germany.

Thanks.


Bob Morrison
W├Ârth am Rhein, Germany
"Luke, use the source!"
BLOG - PHOTOS - Thingiverse
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 13, 2010 03:33PM
Hi,

Just found the world of Mendel, I don't know what I don't know but I need to start accumulating parts.

I am interested in two sets. Both PTFE. One with the 0.5mm orifice, one with the 0.3mm orifice.

Thanks.

Scott
I would like a set of both...
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 13, 2010 03:57PM
PM's and an e-mail sent.
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 18, 2010 02:36PM
btt
Hi Brian,

any more parts left?

dalton_newcombe at rogers.com
Toronto, Canada
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 19, 2010 06:48PM
E-mail sent.

Dalton Newcombe Wrote:
-------------------------------------------------------
> Hi Brian,
>
> any more parts left?
>
> dalton_newcombe at rogers.com
> Toronto, Canada
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 21, 2010 09:47AM
Hello Brian,

I am interested in two sets. Both PTFE. One with the 0.5mm orifice, one with the 0.3mm orifice. I am living in the Netherlands.

Regards,
Kok Rasser
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 21, 2010 10:04AM
PM Sent...

kokr Wrote:
-------------------------------------------------------
> Hello Brian,
>
> I am interested in two sets. Both PTFE. One with
> the 0.5mm orifice, one with the 0.3mm orifice. I
> am living in the Netherlands.
>
> Regards,
> Kok Rasser
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 23, 2010 10:55PM
I'm interested

...please send info
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
February 23, 2010 11:32PM
tbone Wrote:
-------------------------------------------------------
> I'm interested
>
> ...please send info

PM Sent!

--Brian
I am interested in a kit to be sent to Cambridge, Ontario, Canada.

Please E-mail me at csingleton(at)meikleautomation(dot)com with shipping and billing information (PayPal preferred)
Sorry, only registered users may post in this forum.

Click here to login