Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
Posted by reifsnyderb
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 21, 2009 08:15PM |
Registered: 15 years ago Posts: 2 |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 22, 2009 04:14PM |
Registered: 15 years ago Posts: 1 |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 22, 2009 04:37PM |
Registered: 15 years ago Posts: 14 |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 23, 2009 07:18AM |
Registered: 15 years ago Posts: 33 |
I might be after another 5 as well.|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 23, 2009 10:41AM |
Registered: 16 years ago Posts: 537 |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 23, 2009 05:51PM |
Registered: 16 years ago Posts: 537 |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 23, 2009 07:56PM |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 23, 2009 08:06PM |
Registered: 15 years ago Posts: 14 |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 24, 2009 09:11AM |
Registered: 16 years ago Posts: 537 |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 24, 2009 09:17AM |
Registered: 16 years ago Posts: 537 |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 24, 2009 04:39PM |
Registered: 15 years ago Posts: 47 |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 24, 2009 06:28PM |
Registered: 16 years ago Posts: 537 |
Ok, disregard the old message. I am ordering the drill bits and will have them by next week.
Regards,
Brian
(Removed old message.)
mostley Wrote:
-------------------------------------------------------
> is there any chance to get a Brass barrel/nozzle
> combination with a 0.3mm orifice?
>
> Even if not I would be interested in a kit.
> Also if you start making the plastic parts I'm in
> too.
Edited 1 time(s). Last edit at 11/25/2009 09:02AM by reifsnyderb.
Regards,
Brian
(Removed old message.)
mostley Wrote:
-------------------------------------------------------
> is there any chance to get a Brass barrel/nozzle
> combination with a 0.3mm orifice?
>
> Even if not I would be interested in a kit.
> Also if you start making the plastic parts I'm in
> too.
Edited 1 time(s). Last edit at 11/25/2009 09:02AM by reifsnyderb.
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 25, 2009 02:39AM |
Registered: 15 years ago Posts: 30 |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 25, 2009 08:30AM |
Registered: 15 years ago Posts: 52 |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 25, 2009 08:51AM |
Registered: 16 years ago Posts: 537 |
ziplock Wrote:
-------------------------------------------------------
> I'm looking for a PTFE/PEEK barrel for my extruder
> (already have a nozzle/barrel). Are you willing to
> sell an individual PTFE/PEEK barrel, without the
> kit? And, if it matters, I would prefer PTFE (PEEK
> is ok, but PTFE is much more slippery!)
>
> -Adam
Yes, I will sell them individually. The PTFE barrels are $5.00 and the s/h is $1.50 if you are in the US or Canada.
I am going to order some PEEK and make the PEEK barrels available, as well.
Regards,
Brian
Edited 2 time(s). Last edit at 11/25/2009 09:28AM by reifsnyderb.
-------------------------------------------------------
> I'm looking for a PTFE/PEEK barrel for my extruder
> (already have a nozzle/barrel). Are you willing to
> sell an individual PTFE/PEEK barrel, without the
> kit? And, if it matters, I would prefer PTFE (PEEK
> is ok, but PTFE is much more slippery!)
>
> -Adam
Yes, I will sell them individually. The PTFE barrels are $5.00 and the s/h is $1.50 if you are in the US or Canada.
I am going to order some PEEK and make the PEEK barrels available, as well.
Regards,
Brian
Edited 2 time(s). Last edit at 11/25/2009 09:28AM by reifsnyderb.
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 25, 2009 08:57AM |
Registered: 16 years ago Posts: 537 |
Hello,
I just found out that I can order drill bits for 0.3mm individually. Last year, I had to order 8 or 12 at a time. (I don't remember which.) So, I am going to order 2 0.3mm drill bits.
Regards,
Brian
mostley Wrote:
-------------------------------------------------------
> is there any chance to get a Brass barrel/nozzle
> combination with a 0.3mm orifice?
>
> Even if not I would be interested in a kit.
> Also if you start making the plastic parts I'm in
> too.
I just found out that I can order drill bits for 0.3mm individually. Last year, I had to order 8 or 12 at a time. (I don't remember which.) So, I am going to order 2 0.3mm drill bits.
Regards,
Brian
mostley Wrote:
-------------------------------------------------------
> is there any chance to get a Brass barrel/nozzle
> combination with a 0.3mm orifice?
>
> Even if not I would be interested in a kit.
> Also if you start making the plastic parts I'm in
> too.
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 25, 2009 09:23AM |
Registered: 16 years ago Posts: 537 |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 27, 2009 03:02PM |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 27, 2009 07:23PM |
hallo brian,
is there a set of parts left for me and would you be willing to ship it to germany? any experiences with shipping to europe and receiving payment from there? my repstrap is ready, just waiting for extruder and electronics. oh, well, and the filament...
thank you,
best wishes,
stefan
is there a set of parts left for me and would you be willing to ship it to germany? any experiences with shipping to europe and receiving payment from there? my repstrap is ready, just waiting for extruder and electronics. oh, well, and the filament...
thank you,
best wishes,
stefan
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 30, 2009 11:30AM |
Registered: 16 years ago Posts: 537 |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) November 30, 2009 11:49PM |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) December 01, 2009 08:58AM |
Registered: 16 years ago Posts: 537 |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) December 01, 2009 01:45PM |
Registered: 15 years ago Posts: 2 |
Just to be completely clear, the kits would consist of only the thermal barrier and the nozzle, not the reprapped frame that holds the parts (motor, etc).
You can contact me at geoffreypi@gmail.com
You can contact me at geoffreypi@gmail.com
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) December 01, 2009 03:06PM |
Registered: 16 years ago Posts: 537 |
geoffreypi Wrote:
-------------------------------------------------------
> Just to be completely clear, the kits would
> consist of only the thermal barrier and the
> nozzle, not the reprapped frame that holds the
> parts (motor, etc).
> You can contact me at geoffreypi@gmail.com
That is correct. The kit contains the machined parts only.
Regards,
Brian
-------------------------------------------------------
> Just to be completely clear, the kits would
> consist of only the thermal barrier and the
> nozzle, not the reprapped frame that holds the
> parts (motor, etc).
> You can contact me at geoffreypi@gmail.com
That is correct. The kit contains the machined parts only.
Regards,
Brian
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) December 02, 2009 07:29AM |
Registered: 15 years ago Posts: 33 |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) December 02, 2009 07:41PM |
Registered: 15 years ago Posts: 3 |
Dear Brian,
I am new on this and I am from Brazil, is it possible buy the kit from you, include shipping cost by US Priority Mail and pay it by Paypal? I usually do it in ebay. Please if possible contact me by here or by gmail -> sduarte@gmail.com I am really interested in the plastic parts, complete set to construct my machine.
Thanks in advance.
Sergio
I am new on this and I am from Brazil, is it possible buy the kit from you, include shipping cost by US Priority Mail and pay it by Paypal? I usually do it in ebay. Please if possible contact me by here or by gmail -> sduarte@gmail.com I am really interested in the plastic parts, complete set to construct my machine.
Thanks in advance.
Sergio
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) December 03, 2009 02:23AM |
Brian,
If you have another kit that isn't spoken for, I'd like to purchase one. Shipping to Winston Salem, NC 27127.
eMail: jeff16c@gmail.com please put Mendel in the subject so I can find it.
Thanks!
Jeff
If you have another kit that isn't spoken for, I'd like to purchase one. Shipping to Winston Salem, NC 27127.
eMail: jeff16c@gmail.com please put Mendel in the subject so I can find it.
Thanks!
Jeff
|
Pete Bergstrom
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) December 03, 2009 10:29AM |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) December 14, 2009 01:14PM |
Registered: 16 years ago Posts: 537 |
|
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0) December 19, 2009 07:00AM |
Registered: 15 years ago Posts: 18 |
Sorry, only registered users may post in this forum.