Welcome! Log In Create A New Profile

Will Share RepRap

spacexula

Will Share RepRap
January 17, 2010 09:21PM

Registered: 16 years ago
Posts: 581

I have a Makerbot in Winston-Salem NC (Central NC). If anyone wants to use it to print off parts just let me know. I don't mind sharing. All I will ask is that you help out with some spare parts and PLA.

repraplogphase.blogspot.com

Reply Quote

J Heinemeyer

Re: Will Share RepRap
January 27, 2010 08:47PM

I could go for the printed parts, those are the hardest to come across anyways tongue sticking out smiley

Would it be possible to have them sent to Phoenix, Arizona? And if so, what would be the price for the parts and shipping?

-Joe

Reply Quote

spacexula

Re: Will Share RepRap
January 27, 2010 10:15PM

Registered: 16 years ago
Posts: 581

Sure, jump on a plane, fly to NC, spend 80 hours, replace your own filiment, and help out with the hardware costs a little on the machine (build a nozzel or something along those lines), and you have a deal.

Share means you spend the time, and I SHARE the printer. I would be more than happy to print you parts for $15 an hour plus shipping though.

repraplogphase.blogspot.com

Reply Quote

J Heinemeyer

Re: Will Share RepRap
January 28, 2010 06:09PM

xD. Actually it was for an Engineering Club at my high school, but it turns out we have a commercial rapid prototyper available anyways, so we will use that instead.

Reply Quote

SebastienBailard

Re: Will Share RepRap
January 28, 2010 06:10PM

Admin
Registered: 19 years ago
Posts: 1,791

xD. Actually it was for an Engineering Club at my high school, but it turns out we have a commercial rapid prototyper available anyways, so we will use that instead.

It will cost ~ USD1000. Try buying a
[objects.reprap.org]

Reply Quote

J Heinemeyer

Re: Will Share RepRap
January 29, 2010 09:09AM

It is actually in the scool for the Engineering Class. I did not know we had it, but it is apparently open to us for use.