Electronics I dont need anymore, Stepper Drivers and Gen3

Hi, I have some electronics I dont need anymore, Stepper Drivers and Gen3, cause Im switching to mbed platform and pololu.

- 1x RepRap Motherboard v1.2 Fully Assembled tested, working - $50
- 1x Extruder Controller v2.2 Fully Assembled tested, working - $45
- 2x Stepper Driver v2.3 Fully Assembled tested, working - $25 each
- 1x Stepper Driver v2.3 Fully Assembled tested, not-working - $8
- 3x Opto Endstop v2.1 Kit tested, working - $5 each

I'm from Czech Republic, Europe. Shipping for one thing is $7 for more things $15. I accept paypal.

Contact me here or on preffered email josefprusa@me.com

All things are from Makerbot.com store.
Reason why I'm listing broken stepper drive is, because it has perfectly good pcb and other components, except the driver chip, you can easily repair it if you have spare chip.
I can offer one pololu driver for $15 in case you want whole electronics from me, to save you one shipping from pololu.
Electronics is using little different connectors, since I find it more practical.

---

-------------------------

Josef Průša
RepRap core dev
Prusa Research owner

Hello there!

Are any of these parts still available??

Thanks,
John

Dunno if PM arrived, yup, all is available, pleace contact me on my email josefprusa@me.com

I sent you an email a couple of days ago, I was interested about the three opto endstops but I'll try to do them by my own on a stripboard!

Cheers from Greece,
John