Mendel webshop online www.mendelparts.com

Just to let you all know, we have our webshop online since tonight.
mendel-parts.com or
mendelparts.com

We will add more products soon.

for example we sell (at this time, prices can change!)
Mendel hardware kit incl bearings,belts,bolts, nuts, steel studding & stainless steel bars for:
119 euro (excl 19% VAT) precut to sizes.. or:
99 euro (excl 19% VAT) uncut in 1mtr sizes.
check whole kit sections here

or 9 x 1mtr m8 studding 4.8 for 12 euro (excl. 19% VAT)
m8 studding 9x1mtr 4.8
or this bearings kit (incl bearings needed for adrian's geared extr) for 19.99 euro (excl 19% VAT).
mendel complete bearings kit

We have negotiated hard and on high levels with some huge companies.
As a results we can offer you these prices
Prices might change (lower or higher), since we just started, we still have to see how it all goes.

We hope to have complete kits incl. reprap parts in a few months.
We have lots of ideas/plans for the future, but for now, it is a start.

And who is "We"?
Well we are called Gubbels Engineering, located in Eindhoven, The Netherlands.
We are a new creative/innovative engineering business, with focus on low budget 3d scanning and 3d printing.
Just in case someone is interested, we also have a cheap 3d scanning service: www.3d-scannen.nl

I like the design. Simple, clean, easy to read and straight to the point. Very nice!

Good prices as well. The shipping to Norway is a bit of a killer for smaller orders though, but that's how it tend to be unfortunately.

Best wishes with your shop!

Yes - I wish this shop had been established 3 weeks ago. I could have saved significantly more than £100 going by these prices rather than sourcing things myself.

Malesh - this will make things easier for those in Europe

Nudel Wrote:
-------------------------------------------------------

> Good prices as well. The shipping to Norway is a
> bit of a killer for smaller orders though, but
> that's how it tend to be unfortunately.
>
> Best wishes with your shop!

Yes we hate the current shipping prices.. but these are the lowest we could find.

I am already busy for two days phoning for other shipping options/premier business accounts etc.
But somehow as a business account with TNT, some prices even go up!!

However we can do postmail this is really cheap, but doesnt have track and trace.
And there are limitations on size. Ill post this info on the website soon (few days)

Ow and problem with Norway is.. its not part of EU. thats why TNT puts it in the outside EU zones.

and thanks for all positive feedback

Very keen prices! I'm impressed. Perhaps we can work together on some things?

All the best,

---

Leo

leo@RepRapKit.com
[RepRapKit.com]

new products coming this week in the webshop (=in stock):
- Thick sheet: 4mm aluminium frog
- kapton tape & film (and lots of it)
- stainless steel bolts, nuts etc at very competitive prices.

PS. We do this on a professional level and scale, for example we started a complete electronics redesign project with a professional partner. We will have cheaper, smaller, easier, better electronics dedicated to Mendel in less then two months maybe.
Keep checking our webshop, since it will update almost everyday now.
www.mendel-parts.com

> We do this on a professional level and scale, for example we started a complete electronics redesign project with a professional partner.

Will you open source the results of this redesign, then?

---

Generation 7 Electronics	Teacup Firmware	RepRap DIY

yes we will open source all results.

Webshop update:

Lots of new parts came last weeks: extruder machined parts, reprap plastics, nichrome,electronics etc.

And in 4-6 weeks we will have the new electronics, first prototypes are being tested now and it works very smooth..

And in 4-6 weeks we will have the new electronics, first prototypes are being tested now and it works very smooth..
Camiel, that is very cool. Where in the wiki are you documenting?

I'd like to talk them up in the blog and the front page once the files, photos, text documentation, and files are in the wiki.

---

-Sebastien, RepRap.org library gnome.

---

Remember, you're all RepRap developers (once you've joined the super-secret developer mailing list), and the wiki, RepRap.org, [reprap.org] is for everyone and everything!