Complete hardware kit (Save at least $50!!!!!)

Hi everybody,


We're selling a complete hardware kit for Mendel II. Because I have access to a great source, I was able to get all the parts at wholesale prices. Consequently, You'll get a great deal here.


Below is a list of all the parts included:

Bolts, Nuts, Washers

54 - M3 Cap Screw 20mm
5 - M3 Cap Screw 25mm
20 - M3 Nut
40 - M3 Nylok
105 - M3 Washer
28 - M4 Nut
130 - M4 Nylok
480 - M4 Washer
40 - M4 Cap Screw 16mm
2 - M4 Cap Screw 20mm
20 - M5 mudguard washer
105 - M8 Nut
105 - M8 Washer
120 - M4 Cap Screw x 40mm


Rods

M8 steel threaded rod
- 2 x 440mm
- 6 x 370mm
- 4 x 294mm
- 2 x 355mm
- 2 x 418mm
- 2 x 330mm

M8 smooth rod
- 2 x 495mm
- 2 x 406mm
- 2 x 330mm

All rod lengths cut to +0.7mm , - 0.0mm ends ground and ready for use or filed further.

Bearings
2 - 8mm x 22mm x 7mm
48 - 4mm x 13mm x 5mm




Price: $140 for the first 2 sets, $160 after that

Payment: money order, check, cash, paypal

Shipping: free!!!!!! (USPS only available if it's shipped to the US, excluding Hawaii and Alaska)


Our Promise: Any part that you're not happy with, We'll send you a replacement for free and We'll continue to do it until you're satisfied with the quality!!!!

I'm flexible with any modifications to the list of parts above. If the changes are insignificant, we'll keep the price the same!!!!

My name is Shawn and our number is 718-666-2590

Feel free to give me a call anytime
and have fun repraping!!



Please note: the list has been modified.

Edited 1 time(s). Last edit at 07/22/2010 03:38PM by monksorlo.

That list looks suspiciously familiar... Berrybros kit , but $70 off their price? Pretty intense.

Has anyone talked to Shawn, or purchased yet? Could you placemat some of the kits you have, so we can start to confirm your legitimacy? Can never be too careful I think!

The list has been modified and a picture has been uploaded. Please take a look.

My kit doesn't include

1.timing belts
2.jigs

Hi Monk,



the number you listed is a new york number, are you in new york?
because I live in new york, if you are too, maybe I can buy from you in person.


Bob

Hi Bob,


Yes, I live in New york. Sure we can meet up and you can take a look at all the parts before you buy them.
I actually prefer this to anything else.

I'm available this weekend.

Hi, i can't seem to get a hold of you through PM....

is this still at the 140$ price? i'd like to buy a kit either way.

ok im a noob here so if i bought this kit what else would i need to be up and printing

Hi, Shawn:

Are all of M8 smooth rods made from stainless steel?
Thanks,

HK Wang

noremac Wrote:
-------------------------------------------------------
> ok im a noob here so if i bought this kit what
> else would i need to be up and printing


Generally, you need the hardware and bearings
belting (which I bought with my hardware order)
plastic reprap parts
thick sheet parts
electronics package & stepper control boards (and maybe USB->TTL cable
stepper motors
host computer able to run software
an old ATX power supply
a plastic extruder and some 3mm plastic wire

I think that's everything.

Gobs of info is on the wiki: [www.reprap.org]

Would you please let me have one kit for $140? tonyphan4321 at yahoo

Edited 1 time(s). Last edit at 09/25/2010 05:45PM by Tony.

Hi, i called you a little bit ago and said i'd send you a mail... but it doesn't seem to be listed here, PM me maybe?

or just email me who_am_I9512 with yahoo.com

Hi HK Wang,


The rods are not stainless steel for this batch, which is already sold out.
I'll get stainless steel rods for the next batch if that's what people want.

Are you still selling these?