[All SOLD Sorry] [Australia] Fully Assembled and Calibrated Greg-Frost-Prusa Mendel
Posted by Greg Frost
|
[All SOLD Sorry] [Australia] Fully Assembled and Calibrated Greg-Frost-Prusa Mendel July 30, 2011 02:39AM |
I have a number of assembled, calibrated and printing machines available.
These machines are ready to box and ship (or pickup if you happen to be local).
They include a number of my design enhancements.
They all have:
Choice of colours available.
$1400AU + postage.
These machines are all calibrated and printing and I will provide you with a copy of the version of firmware I use (with the calibration settings) and my Skeinforge settings, so they are plug and play.
I will provide support on IRC in #reprap to help you get it going as soon as possible (I'm in there several times a week, but im sure others will help if I am not around.)
Includes a personalised instruction session if you buy local [Adelaide] and can pick it up.
Three of them:
Three More:
Edited 4 time(s). Last edit at 12/04/2011 08:50PM by Greg Frost.
These machines are ready to box and ship (or pickup if you happen to be local).
They include a number of my design enhancements.
They all have:
- My LM8UU linear bearing x carriage incorporating adjustable Belt tensioning system: [www.thingiverse.com]
- My LM8UU y bearing mounts for the Y carriage: [www.thingiverse.com]
- Adjustable belt tensioning system on the Y carriage too.
- Firmware controlled (via Solid State Relay) 1600W mains heated aluminium bed with removable clip on glass build platform (perfect for printing PLA).
- RAMPS V1.2 electronics with MEGA-1280 clones.
- Stainless steel frame and smooth rods.
- My Adjustable z couplers (to eliminate z wobble): [www.thingiverse.com] or [www.thingiverse.com]
- All metal hotend (with PTFE liner) with mounted Fan for cold end heatsink.
- My Hinged Accessible Wades filament pusher: [www.thingiverse.com] with silicone idler "springs": [www.thingiverse.com]
- Mechanical Endstops
- Chatter cover on the top rear threaded rod.
- Filament spool Spindle with printed ball bearings for unattended printing.
Choice of colours available.
$1400AU + postage.
These machines are all calibrated and printing and I will provide you with a copy of the version of firmware I use (with the calibration settings) and my Skeinforge settings, so they are plug and play.
I will provide support on IRC in #reprap to help you get it going as soon as possible (I'm in there several times a week, but im sure others will help if I am not around.)
Includes a personalised instruction session if you buy local [Adelaide] and can pick it up.
Three of them:
Three More:
Edited 4 time(s). Last edit at 12/04/2011 08:50PM by Greg Frost.
|
Re: [Australia] Fully Assembled and Calibrated Greg-Frost-Prusa Mendel September 02, 2011 07:34PM |
Cheapest shipping quote I could find to rwanda was around $350AU. 
Sorry, only registered users may post in this forum.