Need 2 parts printed.

Greetings RepRappers,

I am currently working on a FabScan (http://hci.rwth-aachen.de/FabScan) and need someone to print me the two printed parts for the project. My own RepRap ins't done yet and I am anxious to finish my FabScan.

Please let me know if you are interested and how much it would cost to make them.

I have attached the scad files for your reference.

Thanks,
david

Hello das,

I can probably do it during next week (provided the dimensions fit on my Huxley, I didn't have a look at the files yet).

Where are you located ? I'm in France, so shipping cost and time maybe an issue if you're the other side of the big pond.


If that's not a problem for you, let me know and I'll have a look at the file to give you an idea of the cost.

---

Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.

Greetings DeuxVis,

I am across the pond. San Carlos, California. 95014. I would order 2-3 each of these two parts.

Please let me know.

Thanks,
david

That's not a lot of plastic, I'd say 10 euros for 3 of each.

Shipping would probably be under 10 euros too, with tracking included.


Do you have any preference regarding plastic kind (PLA/ABS), opacity and colour ?
Anything special that should be known as a printing constraint ? I had to turn the turntable holder upside down to make it printable.


If you're fine with that, I'll print one set first, show you pictures, and then we'll proceed with payment, printing and sending the others.

Am awaiting your reply to print a first test set this weekend.


Out of curiosity is fabscan your design or are you just using it ? I'd probably like to build one given enough free time.

---

Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.

Here are the first parts :



Let's talk in PM about the remaining.

---

Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.