Been trying to get an LDO 2004 smart controller to work with the Eisny Retro, I didn't think there was anything different on the board but I've tried 2 and neither work. I've define the correct display unless I'm missing something else. Marlin 1.1.9 bugfix. I can get the full graphic smart display to work just fine. I've used several generic smart controller displays off Amazon and never an issuby RC-CnC - Firmware - Marlin
How is the Rino gearbox working out?by RC-CnC - Extruded Aluminum Frames
Hey is there anyone state side who custom cuts v-slot anymore? Hobby-Fab was the only one I knew of and they are out of business.by RC-CnC - Extruded Aluminum Frames
Ohh I thought it was for use with a probe...I'll give it a tryby RC-CnC - Firmware - Marlin
But I'm not using a probe of any kindby RC-CnC - Firmware - Marlin
Hi Marlin 1.1.8 Anybody know how to offset z height to physically be 1mm above the mechanical endstop switch after homingby RC-CnC - Firmware - Marlin
Yes that's the jist. I have a mechanical endstop for the z axis. To use this feature though I need it to be 1mm above the end stop after homingby RC-CnC - Firmware - Marlin
Thankyou 1 more question Z offset So right now I have my z min endstop at 0 on the bed, then I adjusted the springs to get .2mm which I've been doing for years. If I move my endstop let's say 1mm below bed, where would I enter the z offset to get me back to .2mm above the bed. Could I then enable babystepping which would give me live z movement?by RC-CnC - Firmware - Marlin
Marlin 1.1.8 My home is 15mm from edge of bed on x and 8mm from bed on the y Is there an offset in Marlin for this so when I do mesh bed leveling manually it's above my workareaby RC-CnC - Firmware - Marlin
Is there a setting in Marlin that I can define which will allow me to make a moves to each of the 4 corners and level the bed manually with the screws?by RC-CnC - Firmware - Marlin
Ohhhhh thought somebody hacked my account or something...no worriesby RC-CnC - Controllers
Huhh? What the hell are you talking about? Im not spamming anyoneby RC-CnC - Controllers
It's a ribbon cable and its keyed can only go in 1 wayby RC-CnC - Controllers
If I have a thermistor connected, shouldn't I see some feedbackby RC-CnC - Controllers
Kinda confused here. Too bad there isn't more documentation Latest version of Marlin Updated firmware on TFT 2.8 Set baudrate yada yada yada I don't have anything hooked up to board, but how do I know it is communicating? Need to define something in Marlin?by RC-CnC - Controllers
Checked it out on amazon.ca They won't ship to the US UGH!!!by RC-CnC - General
Well this morning the finished print revealed the same results. About 2/3 the way up the print I could see a definite line separation line with the aid of a flashlight. I removed the print and it didn't take much force to separate the print at that line. I thought maybe the issue was sidewalls to thin so I increased from 2mm to 3mm with 4mm bottom. I'm printing 240/75 no fan at 45mm/sec. Photby RC-CnC - General
There are alot of brands of PETG out there. Are there any that aren't so glossy. Im not really digging the shiny appearance.by RC-CnC - General
Got a different brand of petg today and just started a 9hr print fir a psu cover. I'll try to update throughout the printby RC-CnC - General
45mm/s 5 perimeters solid walls no infill no fan Going to order up some 20mm extrusion and make an enclosed stand I guessby RC-CnC - Printing
Hmm still having poor layer adhesion imo PSU Cover 2mm sides 70mm tall. Just by chance I squeezed it picking it up with the weight of the mount PSU and it cracked. Ugh! I'd really like to make this out of ABS. Tried several times layers always separate even with a blanket over the printer. But I think it's just way to tall??? Might have to build a heated chamber??by RC-CnC - Printing
Here is what I came up with. 238/75 Printed quite a few parts today. Only real big issue is getting it to stick without it balling up first, been just pulling the blob away with my ruler String hasn't been a big issue, there are some, but with time I think it'll get dialed in better.by RC-CnC - Printing
Got it dialed in better. Took several hrs. Still not as perfect as my ABS print but its closeby RC-CnC - Printing
Have some time to mess with PETG today Based on your settings you posted I got the first layer to sick fairly decent, but it didn't adhere really well. I adjust z axis to .05 and my first layer height to .25 100% height 106% line width dropped the speed way down to 14% Still wasn't sticking at this point so I slowly tightened up the height with the bed screws until it did. Curious why the infilby RC-CnC - Printing
I got similar ones for Alixpress that are injection molded like these and after waiting nearly 3 weeks the fit is horribleby RC-CnC - General
Yeah I've seen that style everywhere My printers are all designed around 20mm type extrusions so I'm limited to a rectangular nut similar to TR8*8 Delrin nutby RC-CnC - General
robotdigg Do you happen to have a link, just spent 10 min lookingby RC-CnC - General
I'll give that a try this weekend Thanks I really appreciate the help. I've been printing with ABS for so long it's all I knowby RC-CnC - Printing