I use Slic3r and Repetier.by pettib - Reprappers
I solved the problem ! After uploading the new firmware to the printer i must run M502 to read the settings to eeprom from configuration.h and then run M500 to store it. What i understand some of the settings on auto bed leveling is stored in the eeprom, wish one i´m not shure about. After i run this everthing work´t like a charm. //Peterby pettib - Reprappers
Anyone who have any more ideá what the problem can be ? //Peterby pettib - Reprappers
The printer is working very well. I had this settings then i build it. The inverted settings is because of a not standard build I3. The x motor is turned 180 deg. I´m using 0.9 deg stepper motors that's why i have other numbers. The only thing that´s not working is the auto leveling and home with probe on servo. When i use the normal z-endstop everything is fine. regards Peterby pettib - Reprappers
Hi everyone. I just mounted a auto bed leveling setup on my Prusa I3 with Marlin 1.0.0 But i can´t get it working. I followed the youtube guide that ZennmasterM has done. All the 3 parts. When i check the offset of the nozzle to the probe i got the following values: X 25.3 Y 6.0 Z 2.0 Then i put - sign in front when i put it in the configuration.h file. The problem is that when i have done homby pettib - Reprappers
Hi I can recommend buying it from 3dLabteK in Poland. I just bought my first printer from theme and i´m very pleased with that. They have an option that you can customise you own printer. And they are very good in supporting there customers. They treated me very well. I´m from Sweden and don´t speak polish. I get all my support in English. They done everything they promised. I can just say that iby pettib - General
QuoteA2 @pettib: How well does the 3D Labtek hot end heat sink work. I noticed that instead of having a fin near the thermal break, it instead has a larger mass. I like the idea of a larger mass at the thermal break, but how well does it work in that configuration. [3dlabtek.weebly.com] I don´t bought there hotend. I bought E3d V5 hotend instead from reprapuniverse.com. And LabteK supported mby pettib - General
QuoteLucasGelf How has Labtek treated you? Are you in the US? They don't seem to reliable and I don't speak polish so it's a bit worrysome. They treated me very well. I´m from Sweden and don´t speak polish either. I get all my support in English. They done everything they promised. I can just say that i´m satisfied, Then it´s up to you to desire. //Peterby pettib - General
Hi I can recommend buying it from 3dLabteK in Poland. I just bought my first printer from theme and i´m very pleased with that. They have an option that you can customise you own printer. And they are very good in supporting there customers. //Peterby pettib - General
Many thanks for this answer. And thanks for the lesson why i got my problem. It´s the same solution that i thought about my self. But i was unsure if i had missed something in the mounting instructions. //Peterby pettib - Reprappers
Hi everyone. I´m totally new in 3d printing and i´m trying to build my first one. I bought a kit from [3dlabtek.weebly.com]. They where very friendly and give me the possibility to choose different components so the printer will be like i want it. The only thing i not bought from them was the hotend. I bought a E3D v5 hotend from The problem i run in to it´s the mounting of the hotend to theby pettib - Reprappers
Hi everyone I just read this thread and think both the Makerfarm i3 and the new I3 Alpha from diytechshop looking good. But it seams to me that the Makerfarm in wood is not at the same quality as a printer in metal. There are some difference in price of this two machines, and I is confused that the Makerfarm i wood is more expensive than the I3 alpha in metal. And even more confusing is that theby pettib - Reprappers
Thanks for that useful answer. I will look little bit more on the forum for the Ormerod and the Mendel before i choose one of them. The sad thing about the Mendel is that the delivery time is about 3-4 weeks. So thats one reason to choose the Ormerod :-)by pettib - Ormerod
Thanks for a quick and useful answer. I read some information about printing in ABS can become a problem with the PLA parts in the printer. Do you or anybody else know if it´s good enough to print new parts to the printer in ABS. I think this will be a problem if you put the printer in a box, if it get warm the PLA will start to fail. I´m not so updated about the software you need to use with 3by pettib - Ormerod
I just found this one Ormerod vs Mendel info but still need answer on the other questions and if there are something to add on the Ormerod vs Mendel battle. //Peterby pettib - Ormerod
Hi everyone. I will start to say that i totally new to 3d printing and i´m trying to learn as quick as possible. I been looking at this printer and my first thought was that this machine i want ! But when i started to read in this forum i become more and more unsure because of all the problems there seams to be. At this moment i thinking about if i will buy this one or the older mono mendel. Arby pettib - Ormerod