Ich habe mittlerweile festgestellt, dass ich nur die neu geslicten Dateien nicht uploaden kann. *gcode1 (kann ich nicht uploaden) *gcode2 (kann ich uploaden) Wenn ich versuche den Inhalt von gcode1 durch den von gcode2 zu ersetzen kann ich ihn dennoch nicht uploaden. Wenn ich hingegen den Inhalt von gcode2 durch den von gcode1 ersetze, kann ich diesen Uploaden…. Verrücktby DerTieja - Software
Hatte wirkich keiner schonmal dieses Problem?by DerTieja - Software
I don't update the version of Pronterface. And I tried to use the "original" folder I received with my printer...with the same error message :/ I changed a bit on the slicing settings "start_gcode" etc. can that make a problem?by DerTieja - Mendel90
I have the problem that I get an error message every time I try to upload a file the printer. I am using Pronterface to upload at Mendel90 Estimated duration (pessimistic): 17 layers, 00:11:21 echo: SD card ok Error:Line Number is not Last Line Number+1, Last Line:0 Resend:1 (I can read the existing files from the sd card) any Idea?by DerTieja - Mendel90
I have found a good alternative. Now I open the Pronsole with some additional commands: ;@python pronsole.py -e "help" -e "connect %comX% %baudrate%" -e "block_until_online" -e "load export.gcode" -e print That works perfectby DerTieja - Mendel90
Hallo Leute, ich habe seit kurzem ein Problem beim uploaden eine gcodes. Ich habe einen Mendel90 und versuche mit Pronterface die dabei hochzuladen. Estimated duration (pessimistic): 17 layers, 00:11:21 echo: SD card ok Error:Line Number is not Last Line Number+1, Last Line:0 Resend:1 (das auslesen der sd karte klappt)by DerTieja - Software
@Uebe Irgendwie komme ich damit nicht weiter und bin langsam am verzweifeln Könntest du doch bitte nochmal für dummer erklären, was ich mit dem quellcode machen muss um mit dem drucker zu kommunizieren? -.-by DerTieja - Projekte
Hallo Leute, ich habe versucht über die Pronsole ein Macro zu erzeugen. Dieses soll sich mit dem COM port verbinden einen gcode laden und starten zu drucken. Wenn ich manuell Connecht COM10 -> load xxx.gcode -> print eingebe funktioniert es, nur als macro nicht -.- ←[01moffline>←[00m macro help Name 'help' is being used by built-in command ←[01moffline>←[00m help macro Define sinby DerTieja - Software
Now I tried it to create a macro but that won’t work as well... i got confused about the Pronsole ←[01moffline>←[00m macro help Name 'help' is being used by built-in command ←[01moffline>←[00m help macro Define single-line macro: macro Define multi-line macro: macro Enter macro definition in indented lines. Use {0} .. {N} to substitute macro arg uments Enter python code, prefixed withby DerTieja - Mendel90
I cant find the .exe to download it... :/ Can some one upload these File?by DerTieja - Experimental
Oh cool Danke Uebe!!!!! ich bin zwar nicht so wirklich top im Programmieren aber ich denke damit komme ich gut weiter Reicht das Anpassen (also können die beiden Python Files alleine arbeiten) oder muss ich die mit anderen zusammen ausführen?by DerTieja - Projekte
Das ist der Java Code mit dem ich zurzeit versuche eigene Befehle zu übertragen. (Momentan nur ein einzelner Befehl, später soll hier der gCode eingelegen werden.) Es sieht zwar so aus, als würde er sich verbinden, allerdings führt er den Befehl nicht aus... import jssc.SerialPort; import jssc.SerialPortException; import jssc.SerialPortList; public class StartClass { static String COM_X = "COMby DerTieja - Projekte
Hallo Läute, ich möchte meinen Mendel90 über ein Cad Programm drucken lassen. Bis zum Slicen komme auch auch ohne Probleme. Allerdings bräuchte ich ein Programm das das Senden an des Drucker übernimmt. Dies soll ohne UI funktionieren, beispielsweise über das CMD mit einem "send xxx.gecode" Befehl. Kann mir da jemand helfenby DerTieja - Projekte
If i establish a connection via pronterface i get the massage "Last Updated: Mar 10 2015 15:51:44 | Author: nophead"' so you are the programmer of these software ore updated it? Is it possible to get the source code to upload a file to Arduino and the code to the start printing? Maybe you can give me a hint will it be possible to create a “own” Pronsole which use default commands (like connectby DerTieja - Mendel90
Kann jemand schon über gute Erfahrungen mit bestimmten Dauerdruckplatten berichten? oder ist diese so gut wie alle anderen?by DerTieja - Druck- und Heizbetten
QuoteD4RK1 Why are you doing it that way in the first place? The better way is to copy the gcode file onto the sd card and then start the print with pronterface. I have a CAD Program. In this program i create PRT-Files. Now i implement a button with a marco which export my PRT-File to a STL-File. After that the macro starts skeinforge (over the console) to slice the STL to a gcode. The last steby DerTieja - Mendel90
I tried to use the Pronsole as well but i don’t got an automatic transmission of the load and send orders… At the moment I must start the Pronsole and enter-> Connect COM10-> Load file.g -> send for every printing ./by DerTieja - Mendel90
Thank you for this suggestion I found this site but i don't know what i have to do... I'm not a good at program something ;-p or did you know some oater good tools i can use? My only request is that I don’t have to use a UI…by DerTieja - Mendel90
both times i use the same gcode.... On the first picture you can see a cube i printed with Pronterface and on the second one i use the send.py method of skeinforge. I will use send.py to implement the whole 3D-functions to another program were i implemented a 3D-Printing button....by DerTieja - Mendel90
Gut, also definitiv eine Dauerdruckplatte Mit welchen Platten habt ihr denn bei euerm Mendel90 schon gut erfahrungen gemacht? ich hatte diese hier gefunden die würde auch gut auf meine Heizplatte passen... @floville: wie oft musst du die Buildtak Falie wechseln oder hällt die permanent?by DerTieja - Druck- und Heizbetten
Hallo Leute, ich stehe gerade vor der Überlegung wie ich die Haftungsprobleme meines Mendel90 (beim drucken mit ABS) am besten lösen kann. Was würdet Ihr empfehlen: Das aufkleben von Kaptonfolie wie diese... oder eher eine Dauerdruckplatte: Wie regelmäßig muss so eine Kaptonfilie gewechselt werden, oder reicht reinigen mit azeton aus?by DerTieja - Druck- und Heizbetten
I have the problem that my mendel90 can print a gcode file without problems if I use pronterface. But if i start printing the same gcode with send.py in the cmd the printing quality is really worse so I can’t use it.by DerTieja - Mendel90
!!!Danke Septur!!! Oh nein wie doof... *faceplam* xD Was bei mir gerade sehr gut geholfen hat war das ich den Lüfter ausgeschaltet habe. Damit habe ich heute richtig gut gedruckt. Ist der Lüfter wichtig beim Druck?by DerTieja - Allgemeines
Vllt hilft Dir das, das ist der gcode der ausgeführt wird. Ich habe die standatz settings von NopHeads PLA0.3 nur mit erhöter Temperatur. M83 G28 G1 X5.0 Y98.0 F9000 G1 Z0.05 M190 S50 M104 S240 M190 S60 M109 S240 G92 E0 G1 E3 F50 G1 E-1 F1200 G1 X40.0 F4000 G1 Z0.3 M140 S60.0 M141 S21.0 M142 S0.0 M113 S1.0 M108 S18.28 M107 G1 X-41.746 Y-27.344 Z0.3 F12000.0 G1 F1200.0 G1 E1.0 G1 F12000.0 M101 G1by DerTieja - Allgemeines
Ich habe Haftungsproblem mit ABS als Material. Wenn ich ein Schild von 15*7,5cm drucken möchte, wellen sich nach einer gewissen Zeit immer die Kanten hoch und das Objekt reist sich von der Heizplatte. Ich hatte in einem anderen Forum gelesen das Haarspray die Haftung erhöht das reicht auch bei anderen Objekten nur hier hält das nicht :/ Ich habe für den Extruder 240°C und für die Heizplatte 130by DerTieja - Allgemeines
And what is with the Temperatures? Did you enabled "Activate Temperature"? And if yes, did you make any changes? I want to implement the Skeinforge tool to another program and so i don’t want to set the Temperature manually.by DerTieja - Mendel90
I have a same problem like Mogal: Z AXIS DOES NOT MOVE UP or up enough... so the printer moves throw the filament and smash the build... (see picture, it should be a cube ) At the android dummy it do the same... I tested the whole day plz help...by DerTieja - General
Das klappt auch nicht wirklich, jetzt habe ich sogar noch das Gefühl, dass das PLA nicht mal mehr richtig auf der Heizplatte kleben willby DerTieja - Allgemeines
Hallo Läute, ich besitze einen Mendel90 von NopHead. Ich habe das Problem, das sich bei einem Druck die z-Achse zu wenig hebt. Da die erste Laierschicht bei einem Druck immer super ist, aber wenn er die 2 bzw. 3 Schickt aufträgt fährt er entweder gar nicht oder Zuwenig nach oben (vllt 1/8 Umdrehung). Dadurch "manscht" der Druckknopf immer in dem Filament rum. (Die Abbildung soll einen Würfel darsby DerTieja - Allgemeines