Would anyone be kind enough to share their firmware for their CubeX or CubePro? I have finally completed my build of my CubePro, but have been struggling tuning in things like the jerk. I would really appreciate it.by jmar896 - General
Would anyone be kind enough to share their firmware for their CubeX or CubePro? I have finally completed my build of my CubePro, but have been struggling tuning in things like the jerk. I would really appreciate it.by jmar896 - General
Hi everyone, I have a CubePro duo, same kinematics as the CubeX, that I am also converting to a reprap, I don't frequent the forums and just found this, but I am well into the conversion already (Electronics stripped, hotends removed, RUMBA and PSU already isntalled, just waiting on my new v6's). Before I reassemled the gantry I forgot to check the pulleys on the printer, does anyone know the pulby jmar896 - General
Hi all, I am in the process of building a printer with a 12*12in (300*300mm) heatbed with a 400w heater element for heating the chamber. I realise that if I want to operate of 12 or 24v dc I would need a 1000w PSU costing at least 150 USD. I am wondering if you guys think it is safe to run the heatbed and heater off a 120vac relay? Also if anyone has a heatbed or heater running off 120 how does iby jmar896 - General
Thanks guys, I reentered all of the settings in and that fixed both of the issues somehow. However after a few successful prints my heated bed stopped working. I was fine tuning some of the settings so that may have caused an issue but after reattempting using stock it did not fix anything. My thermistor reading is showing a normal 22-27 degree range depending on the environment temp, but it doesby jmar896 - Reprappers
Hi, I have a Folger Tech i3 that Ive been having problems with lately. In Repeter its been saying both my bed and extruder temp are over 1000 celceus when there cold. Its saying temp error, reset using M999, something I dont know about. What is M999 and how do I reset it? Im guessing its something on the RAMPs board but Im not sure, I also have an issue with an endstop, its saying endstop not preby jmar896 - Reprappers