Is it possible to build a headless cnc router without using a computer by using the same full graphic smart lcd controller 12864 my reprap 3d printer uses? all the homemade cnc routers I have checked uses a standard computer to deliver the gcode to the arduino powered cncby cearza - General
well, in order to make money selling cups I need a kiln, right? thanks for you comments sirby cearza - Crowdfunding Projects Announcements
I have modified my delta printer to print porcelain clay, I got bored printing plastic and I wanted to make my own and customized coffee or espresso cups, you are welcome to visit my link.by cearza - Crowdfunding Projects Announcements
I would like to add a second extruder in my 3d printer, it's a paste extruder, no heat bed and hot tip are needed.So, no temperature control is required for the second extruder. The idea is to leave the current filament extruder in slot E0 and install a second driver in slot E1 that will drive the paste extruder. Can someone give me a clue on what features should I modify in my code? I'm using rby cearza - General
I'm just using an arduino uno and a single A4988 driver to power my stepper motor, the pins (ms1,ms2 and ms3) are disconnected so the motor is running in full step mode, but I would like to try different resolution like (half,quarter,eight etc) but I cannot find information on how to connect those pins, someone knows how to do that?, this is my board: Admin edit : fixed formatingby cearza - General
Can my A4988 step motor driver handle a motor that has a rated current of 2 amps?, It will be necessary to move the potentiometer to adjust the current limit for the new motor?by cearza - General
When I start printing I would like to move the extruder in the "Y" position about 20mm from the center of the heated bed to the front, how can I do this? I'm using repetier as my host. Thanksby cearza - General
I'm trying to use a paste extruder on my delta printer, obviously I don't need the hot end neither the heated bed. I'm using repetier as the host for the models I'm trying to print; on the printer settings I uncheck the extruder & bed temperature request but the printer doesn't start, is there another setting that I need to change?by cearza - General