How does the duet maestro 2 compare to a duet wifi? Best I can tell, the main thing is lower stepper current capability and no wifi of course. I'm sure it's without other features as well that I'm missing. The 0.9 steppers I have, have a rated Voltage: 2.8V and rated current Per Phase: 1.68A. How does that translate to real world usage so I can know what to look for in a control board? My ignby guycobb2 - General
Very good. Thanks sir. I believe on their site they advertise 0.05 layer height capability. I'll know more about it after I get my hand on it. I appreciate your responses.by guycobb2 - General
Jump to 5:52 to see a little closer look of Z axis.by guycobb2 - General
If you mean any geared reduction then no, not that I'm aware. No clue on the z steps/mm.by guycobb2 - General
So the Cetus being belt driven linear rails on all axis, 0.9 steppers should help some, an I understanding correctly?by guycobb2 - General
I do indeed need to check the compatibility of the Cetus steppers with the 2130s. However, since I do prefer quality and still have my 0.9 steppers from my Ultibots printer, would there be any advantage to a duet with the 0.9 steppers, vs the Rambo and some 1.8 steppers. I won't pretend to full grasp microstepping or which would produce the best real world results, so I'll have to take your respoby guycobb2 - General
Thanks DC42, my first printer was a Ultibots D300vs plus kit that utilizes your duet board and I like it just fine and it's a great product. I thought the Rambo a good choice since it's a little less cost than a duet as well as met the list of "wants" I had in mind. I have a power panic board I can utilize, a meanwell 350watt 24v PSU to power it all with and I've found I prefer octoprint due to iby guycobb2 - General
Thanks DC42, my first printer was a Ultibots D300vs plus kit that utilizes your duet board and I like it just fine and it's a great product. I thought the Rambo a good choice since it's a little less cost than a duet as well as met the list of "wants" I had in mind. I have a power panic board I can utilize, a meanwell 350watt 24v PSU to power it all with and I've found I prefer octoprint due to iby guycobb2 - General
I don't consider moving from mediocre rods and bearings (which have already failed on the x axis after just 4 months) to high quality iko linear rails a downgrade, a lateral move at the worst. I do see the control board as the Cetus' weakest point, hence my desire to swap it. The heated bed will not be a problem adapting and hooking it up. I'm looking into the stock hotend to see what it will invby guycobb2 - General
So I can't help but want to give a Cetus a go. I currently have a 4 month old Prusa MK3 that I'll be swapping a guy for a Cetus extended here in the next few days. Whilst I intend on using the Cetus in its stock form for a bit I've decided that I want to upgrade the control board and maybe a few other things to make it quieter, allow me to modify the bed to a heated on (not a fan of the OEM heaby guycobb2 - General