I am getting a complex! Any picture that I try to post from my RPI running Raspbian using Chromium is rejected as TOO LARGE??? Help Mr. Wizzard... Drizzle drazzle drozzel drone, time for Zis one to come home! Jeff KG7TXIby jhansx - General
So after homing all axes a Reptier Host command to move "50" moves the X axis 99.63 and the Y axis 98.20. Now how do we translate that into the X and Y movement settings. I will bet that the measurements are closer to identical and very close to 99 and the difference is measurement error but that is what I got, checked it three times. Hope I can actually do a print... Thanks for your awesome helpby jhansx - Reprappers
No i just mean it is supposed to support 32 bit processors not more speed necessarily but more iterations.by jhansx - Reprappers
Awesome. I believe very much that it does not matter who built the printer it is a matter of getting the correct settings and then in theory, if it is a rigid structure,it should print exactly like a prusa. The difference being the prusa will do it out of the box and the DIY kit will do it in about a month or two. I spent three weeks last month 3 to 5 hours a day trying to make a Delta printer woby jhansx - Reprappers
After X axis home using the LCD "Move axis" I got the X axis to move 140 "mm" to travel across the bed (215mm measured) to the hard stop on the extreme of X movement. Repeating with the Y axis I got the plate to move 122 "mm" before hitting the endstop at the extreme of Y movement. I do not know how to translate these into settings for the machine. Jeffby jhansx - Reprappers
The controller that I have is a board from Amazon that is an a ramps 1.4 board. This is the link. I also have a Ramps v1.6: Tha latter is JUNK but uses 1.4 logic, layout, and wiring. Thanks again still plugging along...by jhansx - Reprappers
you must have had terrible experiences on the forum giving out your email. I understand. I believe I have managed to copy the link for the video on my Google drive.by jhansx - Reprappers
BTW, what probe do you use and where did you get it? Jeffby jhansx - Reprappers
Oh well. At least it is closer. Said our hero as he sharpens his harikiri dagger. I changed the steps/mm to 400 and it seems stopped slamming into the end stops. It does a g 28 fine but g 29 does only the back 1" of center. Tried to do a video but forum won't let me UL a 4.5 Mb file. Please PM me an email for you so I can send the vid. I will not abuse the privilege. Thank you again for your helpby jhansx - Reprappers
Well I'm sure you are regretting starting this with me. You are so great and your patience is incredible. I am using Arduino 1.8.9 and have no problems compiling and uploading the current file. I can home X, Y, and Z. Then when I try to do a G29 or use autobedleveling on the controller I get the results shown ini the picture. I added this code to get it to compile: #define MIN_PROBE_X X_MIN_POSby jhansx - Reprappers
Master, you are a God. I will implement when I get home. Thank you again. if ever you are in the Wyoming area and need help Southwest Wyoming in particular you have only but to ask. Peace on your house. Be safe. Jeff KG7TXIby jhansx - Reprappers
Here are the copies of the errors. I can circumvent them by using this: //#define MIN_PROBE_X X_MIN_POS //#define MAX_PROBE_X X_MAX_POS //#define MIN_PROBE_Y Y_MIN_POS //#define MAX_PROBE_Y Y_MAX_POS However it causes it's own set of problems.display the error the L,R,F,B out of bounds On the Thank you again for your help. Be safe. Jeff KG7TXI Arduino: 1.8.9 (Windows 10), Board: "Arduino/Genby jhansx - Reprappers
i shall apply and try it. thank you again. your help is beyond value. be safe Jeff KG7TXIby jhansx - Reprappers
That is supposed to be L,R,F,B out of bounds but the forum editor interpreted it as an emoji code. Attaching the config and the .ino Help Mr. Wizard! Drizzle, Drazzle, Drozzle, Drone, Time for zis von to come home...by jhansx - Reprappers
Maybe there will be some time for you to help me again tomorrow. I spent all day on it again. Got it to UL the program but had to fool around with boundaries to get the UL. it homed all axes but when I tried a G29 it said "? (L,R,F, out of bounds. I will attach my configuration H for your evaluation if you have time. Thank you again. Be safe Jeff KG7TXIby jhansx - Reprappers
First, Thank you for casting a ray of hope. The lead screw has an OD of 8.02 (avg of 3) on my digital caliper. It is hard to measure nozzle movement but the blocks can be measured and 360 deg raises (or lowers) the block 8.2 mm (avg of 5). My drivers are DVR8825, theoretically capable of 1/32 step. I have all jumpers in on the main board and so should have 1/32. Using the Prusa calculator and givby jhansx - Reprappers
413 Request Entity Too Large nginx/1.10.3 (Ubuntu) is what I get trying to UL vid of my probby jhansx - Reprappers
Cant upload photos or the video of what is happening, system says too large, Thank you so much for your help, your time, and your willingness to share.by jhansx - Reprappers
If you have a multimeter you can check the mosfet conductivity against a working one. WITH THE POWER DISCONNECTED! and only WITH THE POWER DISCONNECTED. Check for continuity among the legs of the working mosfet then compare to the one in question. If as imqqmi suggests it has failed there will be continuity (very low resistance) across the power and ground and the part she is cooked. Just be careby jhansx - Reprappers
Hi all. I am embarrassed to say I have had this printer a year and have had ab out 4 good prints. Fought and fought and finally gave up. Originally it was a CMY3D Chinese clone of a Troxny clone of an I3. I scrapped the board and built it basically from scratch with a Keystudio Ramps 1.4 board. I have mosfets for the board and hot end and a Arduino Mega 2560 as the microcontroller. I have a repraby jhansx - Reprappers