QuoteDust Should do... Thank you all working Dust you are a Star, now should i open a new tread regarding the printing issue that i have? and because of that i messed with arduino?by nitros - General
ok thank you all worked, i will change the values accordly and should work if i launch Creationtion workshops?by nitros - General
QuoteDust Your not uploading the hex file.. Your compiling a random version of grbl you found somewhere which generates its own hex file that is then uploaded. Open the command prompt from what you have provided you need the command E:\documenti\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino17/bin/avrdude -B 1 -V -p m328p -c arduino -P COM5 -U flash:w:grbl_v0_8a_edge_328p_16mhz_9by nitros - General
Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes. E:\documenti\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino17/bin/avrdude -CE:\documenti\ArduinoData\packages\arduino\tools\avrdude\6.3.0-arduino17/etc/avrdude.conf -v -patmega328p -carduino -PCOby nitros - General
This is another one and it load fine as yuo can seeby nitros - General
QuoteDust Its in the file name grbl_v0_8a_edge_328p_16mhz_9600_build20120310.hex 9600 baud ok so yes i choose the right one but still nothing, i tried to install another one and it work but has move axis than only Z, but still i don't know why the monitor does not work, is there a way to check if i load it?by nitros - General
QuoteDust Did you set the correct baud rate? I don't know which one is the correct one?by nitros - General
QuoteDust to upload a hex file you will need to use avrdude on the command line something along the lines of avrdude -B 1 -V -p m328p -c arduino -P {your com port} -U flash:w:{file.hex}:i -U where you have replaced {} with your machine specifics This makes the assumption there is a bootloader installed in the 328p If there is no bootloader you need a second bit of hardware called an avrisp aby nitros - General
thank you for your help, i found those already the issue i don't know how to load themby nitros - General
Hi, All, sorry i couldn't find the presentation section so i post it here, I will briefly tell you my issue so perhaps you can tell me on which section should i post my tread, I have an 3d printer, LittleRP, which is controlled by sparkfun RedBoard, the printer is second hand, i have not clue how is programming with arduino, now this printer never worked as it should, most probably some issue onby nitros - General