i grabbed a tooth pick, 20 awg magnet wire (wire to make coils for motors / electric magnets). made 5 to 7 turns one direction, then continued to wrap it back down the tooth pick 5 to 7 turns, then wrapped it back in the original direction for 5 to 7 turns, then back one more time in other direction 5 to 7 turns. IT LOOKS FREAKING UGLY!!! it looks like a picked up out some trash heap *frowns*by boggen79 - Developers
instead of moving paddles / mixers. "STATIC non moving mixers" A = hydraulic cartridge valve = google it and click images. --it allows a "large" path between, to liquid filament, to nozzle. and the only time there is small sized holes would be right at the cartridge valve. were the liquid filament would enter small holes into the center channel of the "3D printer filament cartridge nozzle" --hiby boggen79 - Developers
how much control due you have over the "feed rate" per filament. (critical) how much control due you have over the "x,y,z" (critical) standard printer (to print crud on paper). has black, yellow, blue, red, etc... ink cartridge. and they print "dots" out. example: for one row.... one blue, one yellow, another yellow, another black, empty white space, empty white space, etc... next row one reby boggen79 - Developers
sorry for being critical was not meant to be mean, honestly wanting to help. I do apologize it was not meant to be harmful. but to look at it and give feed back in positive behavior. your blog was awesome! and help me better understand thank you for taking the extra time with detail i do truly understand blogs, videos, just plain documenting is job and in of itself *been there done that* 1) loby boggen79 - Developers
Quotecozmicray Perhaps a sprial bevel gear they are very smooth and used in Hi torque applications (differentials) ?What is the best (smoothest) right angle gear configuration? Have to also consider the locking of the gear? plus 1 i no longer remember details. i know there is a better gear setup out there. at moment both Apsu, and what you link. the gears will either want to jump "up" oby boggen79 - Look what I made!
automotive -> radiator hose, coolant hose. tractors small and large -> radiator hose, coolant hose, hydraulic hose, lawn mowers, small engines (2 cycle, 4 cycle engines such as chain saws and weed eaters / trimmers) = shops should have high end temperature hose. make sure you read up on "min bend radius" for hose. google "min bend radius hose" i want to say it is 3 or 5 times outsideby boggen79 - General
looking over your youtube 12 video.... bad stuff first, good stuff last. *meh* THE BAD STUFF 1) to many stacks of metal 2) 1 or 2 heater elements for everything not per filament 3) water cooling for everything not per filament 4) filaments are at different spacings to single nozzle end vs same spacing to nozzle end (60 degree offset around a circle to each other) 5) cold water mix with hot wateby boggen79 - Developers