También es importante asegurarte de que las poleas dentadas están bien sujetas a los ejes sin tener juego cuando éstos cambian de sentido.by misan - RepRap en Español
En realidad al repasar la foto veo que tienes duplicadas las piezas del eje Z, están tanto las del modelo de madera como las del single_frame. El carro y la tres piezas de los rodamientos lineales del eje Y corresponden al modelo de madera, pero se pueden montar en en un marco de aluminio (aunque quizá no encajen los taladros de los primeros). La guía de la cinta del eje Y también corresponde aby misan - RepRap en Español
Las piezas que tienes son para la versión de marco de madera (box frame) que si puede utlizar rodamientos 608 para las poleas.by misan - RepRap en Español
Te salen unos dos juegos de i2 por kilo de plástico. Pero depende de la cantidad de relleno, claro.by misan - RepRap en Español
No se ven las fotos pero es probable que la calibración de la extrusión sea la causa.by misan - RepRap en Español
A Slic3r le indicas la velocidad de impresión y la de movimiento sin imprimir pero no la del eje Z de manera aislada. y no parece que piensen en añadirla ...by misan - RepRap en Español
La PRusa i3 puede ser de varios tipos, con marco de madera o con marco de aluminio. Ambas emplean diferentes tamaños de varillas. En este video tienes el juego de medidas que hemos empleado en los talleres de FabLab Valencia:by misan - RepRap en Español
Más que cambiar el Gcode puedes limitar la velocidad máxima del eje en el firmware. Normalmente en el archivo Configuration.h En Marlin es esta linea: #define DEFAULT_MAX_FEEDRATE {500, 500, 5, 25} // (mm/sec) Ponle un valor de de 2 (en vez de 5) para ser más conservador.by misan - RepRap en Español
Si miras en la lista de Clone Wars hay algunas ofertas de materiales (varillas, correas, poleas, electrónica ...) que te pueden interesar.by misan - RepRap en Español
Aquí tienes las piezas en STL y también referencia a los fuentes por si las quieres modificar:by misan - RepRap en Español
Idlers in vanilla repo expect an M3 screw and nut, so you need to go to 623 bearings for that. I have done a quite a few prints of vanilla repo and it will fit a 623 though the comment says 624. If you look at the radius of the internal hole is 5.1 (which will fit a 623 nicely and tight).by misan - General Mendel Topics
As Josef has released a new version of his Prusa Nozzle this may not be of much use for those buying the new one, but for those with the "older" version and having some trouble of filament being eaten mid-print, the solution to my problems has been to add a fan duct that directed the air to cool all the barrel. A side effect is that now I can print almost 40C cooler than before without any problby misan - General
Very nice indeed. But heat cartridge may be difficult to fit in such a tight space.by misan - Extruded Aluminum Frames
TAZ printer also has a 30x30cm printing surface. Some people are using this heater:by misan - General
Unless you need the inside of the motor to be a copy of the real thing, I would look for a foam milling workshop equipped with a CNC machine. Volume recreated with the milling operation will need to be finished and painted by an artist. Much faster, cheaper and likely lighter (the latter may be bonus if it is to be hanging from the exhibit ceiling) than 3D printing.by misan - General
This one I designed it for 30mm T-shaped x-carriage of single_plate i3.by misan - General Mendel Topics
My guess is that it was manufacturing defect which trapped some air bubble inside the glass or that temperature rose well above 300C.by misan - General Mendel Topics
I guess box_frame can handler heavier extruders better and for that a beefier carriage is called for. The holes are slightly smaller than M3 thread, so if you tap them M3 no need for nuts (there is not pulling force on the M3 screws). If you cannot tap them, just screwing the bolts will do it too.by misan - General Mendel Topics
This part is to be attached to a T-shaped x-carriage from single_plate Prusa3 repository. For Jhead the screws that fix it should be oriented like the ones shown in the picture above, so the back of the extruder should be flat ...by misan - General Mendel Topics
I have used Minitec for large format CNC and 3D printers. I love the power lock fastener! The price is good and shipping is fast.by misan - Extruded Aluminum Frames
Very nice build indeed. Please let us know how the bearings are working.by misan - Extruded Aluminum Frames
If you just go to Marlin.h and change #define MYSERIAL Serial to #define MYSERIAL Serial2 it will route serial comms to that other port but Marlin codes its own serial handling routines. I do not know what you need to have two serial ports working at once in Marlin but I reckon one touch-sensitive LCD panel was using a serial port and working with Marlin with a modified firmware, I woulby misan - General
These ports are UARTs. You can use them ... I did, and it worked,by misan - General
It worked nicely for me as Serial2: It is a regular serial port, just do Serial2.begin(9600); and then you can do Serial2.write ...by misan - General
Why would you want to use SoftwareSerial? Mega has four serial ports. Use pins 16,17 instead.by misan - General
I could not see video, but I would guess some of the extruder motor wires is breaking due to the flex action of x-carriage motion, causing intermittent extrusion failures and stuttering noise.by misan - General
Depende de qué programa emplees para hacer el laminado de la pieza (Skeinforge, Slic3r, etc). Normalmente se llama infill y es un número entre 0 y 1 (1 es el 100% de relleno).by misan - RepRap en Español
Pero ¿ha funcionado esa placa en algún momento?by misan - RepRap en Español
¿cambiando el cable del termistor de T0 a T2? Si es es así lo que está mal es el termistor, Comprueba qué valor de resistencia te da desconectado midiendo entre los dos pines. Muchas termistores se rompen a los 300C. Si has tenido alguna maniobra en la que el hotend ha superado esa temperatura el termistor se puede haber roto.by misan - RepRap en Español
Lo he revisado y sí emplean RAMPS, en ese caso siguiendo la lógica y sin conocer su firmware ponle un 4 en vez del 2. en TEMP_0_PINby misan - RepRap en Español