How about the "CONTACT US" under the "Navigation Menu"?by Mogal - General
Quoteisolt I got this response about licensing from them "Your license allows you to install the software on up to 2 different machines that you own. For example, if you wanted to run it on a laptop and a desktop, that would be fine!" So if you have a friend it looks a bit more affordable... That manual support placement looks intriguing. LOL Awesome! way to support the programmers! Just go tby Mogal - Mendel90
I just got a bunch of 625vv bearings for a buck a piece on ebay. free shipping.by Mogal - Delta Machines
Great info here, thanks! I am currently making a CoreXY and will be using a bowden setup, although I have still opted for 1.75mm filament.by Mogal - General
Thank you zelogik. I have the parts printed so I will try them, and see what happens. I will make them stronger if they flex too much.by Mogal - CoreXY Machines
I've tried to simplify the design by using less nuts and bolts. (Everything is still in the design phase and my CAD skills are lacking!) Will be using zip ties instead of bolts to hold the linear bearings into place. The roller bearings will be bolted into place The Y axis use 12mm rods, and the X axis uses 8mm. I'm reworking the belt retainer on the carriage. (Currently a tapered slot that tighby Mogal - CoreXY Machines
zelogik & jand Hey Zelogik, the more I look over your design, the more I like it. I think I'm going to forget my design for the time being, and build yours! (with the help of jand's STLs for printing) Ultimately, I'd like to know if either of you have made any more progress? It'd be great to see a couple more video's of things in action, and something being printed! Cheers, and once again,by Mogal - CoreXY Machines
Any more work being done on this?by Mogal - Firmware - experimental, borrowed, and future
A promise is a promise - Ultimaker QuoteAlways nice when companies stick to their word, and this past weekend Ultimaker has done just that. When the pro open-source company released the Ultimaker 2 3D printer six months ago, they promised to promote the culture saying that the source files would follow within months — they are now available via github.by Mogal - General
What about these little guys? H3457 Fast Response Micro Probe Sensor: NTC thermistor; M3 threadby Mogal - General
jand! Thank you for the ViaCAD models! I've had ViaCAD for over 2 years and still can't model like that (Although I don't really spend much time with it) zelogik, Yes I know what you mean, and see that now. I will take that into consideration. I may just revert back to entirely your design, but just use the MDF framing... I have a lathe and mill as well, maybe I will make some parts from aluminby Mogal - CoreXY Machines
I got a little more done. Hope this explains what I'm doing. Trying to maximize build volume. (The top will be solid - I left it clear for clarity)by Mogal - CoreXY Machines
Oh sorry... I understand the 'racking' problems with the HBot design. the twisting of the X/Y axis during movements... What I do not like is the cantilever design of the Z Axis (Lifting/lowering the bed) I don't like the drive mechanism being on one side (just seems lopsided and unsteady) I prefer the bed to be supported on two sides (Seems more stable) My ultimate goal is to have a design likeby Mogal - CoreXY Machines
Hum... $3 x 20% = $3.60 $16 x 13% = $18.08 LOL nope, you still win! Joking aside I know you guys have a hard time with the taxes, it really sucks! ----- As for my design, its a work in progress. I'm still thinking it through, and watching you guys. I will have spaces for the belts to pass through on the upper surface... I'll post more pics when I get it designed in. I do know I wont be usingby Mogal - CoreXY Machines
Sorry, I don't have the CAD/Rendering skills as some of you around here But this should be enough to get the idea across... I've built a small enclosure for my CNC electronics and it works very well. Still working on this, but I'm sure this would work and be rigid enough for the build. Think of it as a tongue and groove set-up. The upper and lower plates will be 3/4" and the side plates will beby Mogal - CoreXY Machines
When it come to the extruded parts, its $16 a meter here. That's for 1"x1" (25mm profiles) Joining plates are $12ea Corner brackets are $5ea. Cap head screw and nut are $1ea. and of course taxes on top of all that. So as you can see, kinda outa range for almost anyone. As for Misumi, I went through the website posted, and it seems Cnds are getting nailed well over $100 in shipping/brokerage feesby Mogal - CoreXY Machines
Quoteakhlut Have you ordered from misumi before? If not they have a deal going on now - First $150 of your order is free. You pay shipping. You need a company for the deal. I'm just meby Mogal - CoreXY Machines
I have to use a cheaper solution for the framing... I can't afford the fancy extrusions. I can however use the plastic parts you guys have and adapt it to an MDF frame. My current Mendel90 is MDF and its 'good enough' and 'rigid enough' for the use. I'll be using 12mm drill rod and LM12UU bearings. I'm most curious to how you guys are going to work the Z axis. I really don't like the cantileverby Mogal - CoreXY Machines
You guys rock! Nice speeds! Can you go any faster? - If firmware is limited to 300mm/s that was the fastest speed Couple questions for yea: What are the acceleration rates you have set? Are your plastic parts the current ones in the GITHUB? Do you have a BOM? How long is each belt? How many teeth on the pulleys? I've started to order parts for my own build!by Mogal - CoreXY Machines
Does CNCZone.com have too many sub forums If you build it, they will come. I think the CoreXY is gaining a strong threshold within the reprap community. Finding info is scarce and I think this will narrow down some of the searching. With Raspberry Pi, its also making a good headway with printers, as it offers lots of add-ons. ie: Wireless, webcam, touchscreen and.. and... and... Octoprint iby Mogal - Administration, Announcements, Policy
Hi! Just wondering if we could get some new sub folders? Under Machine Variations: CoreXY Under Electronics: Raspberry Pi Under Software: Octoprint Thanks!by Mogal - Administration, Announcements, Policy
I had used carpet tape before, but after about 2 months it fell off. It ended up failing during a print and falling between printed parts, knocking everything off! So that's why I made this piece. I needed the assurance that wasn't going to happen again! a dumb lesson learnedby Mogal - Mendel90
It opens okay in Reptier host for me? Can someone try the STL file please.by Mogal - Mendel90
Quote3Design hi, can you put the design on thingiverse, this design is what i need to cool my j head Sorry, I don't have a thingiverse account, I posted the STL above. What format would you like it? I guess this still works for those that don't want to print a full X Carriage.by Mogal - Mendel90
Ah crap LOL and I just printed a spare X Carriage too Thanks, I'll keep this in mind for a future build. I wonder if we could start a running thread with 'public' M90 updates here?by Mogal - Mendel90
When I first started printing, my JHead would continually jam. Since I've installed a fan to cool the JHead, I have not had a single jam! I used to have the fan stuck to the bottom with double sided tape, but have since made this little mount for it. I just epoxied the mount to the bottom... Works GREAT! It's a 40mm fan and has enough clearance for everything. I Would like to incorporate it intoby Mogal - Mendel90
QuoteNewPerfection The link works just fine. I even downloaded the book and stripped it of DRM. It's now readable outside of Amazon's Kindle app Care to share?by Mogal - General
Have you printed these yet? I think I'd like to give them a go too.... (anyone willing to convert these to STL? - I don't have open scad installed)by Mogal - Mendel90
K, new question Is there a way to download (save) the firmware currently installed on the arduino? I'd like to give this a go, but I'd like to save my current firmware 'just in case' I'd like to revert back. Thanks! (After a new computer build, I lost my old firmware file)by Mogal - Mendel90