Why don't you settle for a pushbutton+encoder ? Seems that it's the standard now... Bye Davideby 3ntrlab - Repetier
Can't help with keypad, but we use LCD with MT2 with no problems (NOW...has been quite a bumpy road making it work). We changed uiconfig.h as following: /** Define the pin */ #if UI_DISPLAY_TYPE==3 // I2C Pin configuration #else // Direct display connections #define UI_DISPLAY_RS_PIN 14 // PINK.1, 88, D_RS #define UI_DISPLAY_RW_PIN -1 #define UI_DISPLAY_ENABLE_PIN 15 // PINK.3, 86,by 3ntrlab - Repetier
homer07 Wrote: ------------------------------------------------------- > a differenza dei cuscinetti le bussole non hanno > bisogno di carico perpendicolare per far girare le > sfere ? Le boccole a ricircolo di sfere, se non sono fatte da una banda di delinquenti, devono poter funzionare col carico anche se NON e' perfettamente perpendicolare. La questione e' : l'albero che si usa e' tby 3ntrlab - Discussioni generali - NO PROBLEMI DELLA STAMPANTE
Ivan Bortolin Wrote: ------------------------------------------------------- > > > > Obbella... e perche' mai ?!? > > Troppi attriti per i miei gusti... Basta usare gli accoppiamenti giusti :-) Hai provato i loro alberi anodizzati ? Ciao Davideby 3ntrlab - Discussioni generali - NO PROBLEMI DELLA STAMPANTE
Ivan Bortolin Wrote: ------------------------------------------------------- > Pessima idea le bussole igus.... Obbella... e perche' mai ?!?by 3ntrlab - Discussioni generali - NO PROBLEMI DELLA STAMPANTE
Interessante punto di vista. Finora io ho usato ABS e PLA di reprapworld. Con il PLA posso arrivare a velocita' molto, molto elevate (250/300 mm sec) ma la qualita' e' ovviamente bassa. Con l'ABS che ho usato finora (blu, grigio) non riesco a superare i 140 mm/sec. Il tutto usando temperature dalle piu' basse (PLA 180) alle piu' alte ( ABS 275). Adesso mi sto guardando in giro per provare altriby 3ntrlab - Discussioni generali - NO PROBLEMI DELLA STAMPANTE
Oh bella, e io che pensavo che per andare @ppalla ci volesse il PLA. Di grazia, qual'e' il miglior ABS in circolazione ? Grazie Davideby 3ntrlab - Discussioni generali - NO PROBLEMI DELLA STAMPANTE
Ciao Epifas, Stiamo preparando i provini per fare le prove di trazione , charpy, etc..... se hai qualche idea/richiesta/suggerimento: sono qui! Vorrei farti notare che lo stesso materiale, su due stampanti identiche, con hw e sw identico non e' detto che dia gli stessi risultati. Qualche punto su cui meditare: 1) Mi e' capitato di stampare n copie di un oggetto in ABS, e di riscontrare vistosby 3ntrlab - Discussioni generali - NO PROBLEMI DELLA STAMPANTE
Probabilmente il tuo movimento Z e' difettoso. Quindi l'estrusore non si allontana dal piano a ogni cambio layer (o incremento di Z che dir si voglia), l'estrusore striscia sulla stampa e perde passi. Potrebbe essere un problema elettrico (Es.: potenza motore insufficiente, oppure un banale connettore staccato) o meccanico (es.: guide impiantate ) IMHO devi rivolgerti a chi ti ha venduto la macchby 3ntrlab - Discussioni generali - NO PROBLEMI DELLA STAMPANTE
bioracing Wrote: ------------------------------------------------------- > Potete indirizzarmi da qualche parte per avere > maggiori informazioni sul tipo di stampa in pla? > Cambia qualche cosa rispetto ad una stampabte in > ABS? Oppure la stampante è la stessa e cambia > solo il materiale da usare? La seconda che hai detto :-) Ciao Davideby 3ntrlab - Discussioni generali - NO PROBLEMI DELLA STAMPANTE
Andrea Wrote: ------------------------------------------------------- > La Form 1 costa 2'500 euro per adesso. Non è > costosissima. Il materiale usato, in effetti, > sembra costoso (113 euro per un litro) ma se Senza dimenticarsi che diversamente da tutte le altre tecnologie, i sistemi DLP (o stereolitografici) usano resine a reticolazione UV et similia.... non esattamente il massimoby 3ntrlab - Discussioni generali - NO PROBLEMI DELLA STAMPANTE
Il produttore italiano del Nylon, ovvero lo scrivente , ha cambiato idea: UHU stick. Basta il piano in vetro, brim+raft. Si applica in 3 secondi (di orologio) e funziona perfettamente. Niente bachelite. Per i pezzi grossi...lo stiamo provando e per uso amatoriale e' perfetto. Intendo dire: negli angoli tende ancora ad alzarsi, ma dimensionando a dovere il raft (in questo caso Cura funziona megliby 3ntrlab - Discussioni generali - NO PROBLEMI DELLA STAMPANTE
Airtripper Wrote: > The selling point for these hot ends have been > about how hot they can go and that they can > extrude PEEK and Nylon. Out of curiosity: has anybody ever extruded PEEK ? Rgds, Davideby 3ntrlab - General
Jasper1984 Wrote: ------------------------------------------------------- > use, but a bit brittle, ABS and Nylon are more > flexible but less rigid.(of course with 3dp > Marketing plug: my filament is an harder flavour of nylon :-)by 3ntrlab - General
Se installi Repetier Host... hai preview + Slic3r :-) Ciao Davideby 3ntrlab - Discussioni generali - NO PROBLEMI DELLA STAMPANTE
immaginaecrea Wrote: ------------------------------------------------------- > la ventola nella foto serve prevalentemente per > raffreddare il PLA (per l'abs non ce n'è bisogno) > durante la stampa, ed è un obbligo con quel > materiale se vuoi dei risultati di qualità. > > Alcuni hotend richiedono anche un ventolino > puntato contro per evitare "surriscaldamenti" ma > laby 3ntrlab - Discussioni generali - NO PROBLEMI DELLA STAMPANTE
Ivan Bortolin Wrote: ------------------------------------------------------- > Prototipi di scatole??? Non gli conviene un taglio > laser e poi se le assembla? A meno che non stampi scatole del cambio :-) quoto @palla! :-) Davide Ardizzoiaby 3ntrlab - Discussioni generali - NO PROBLEMI DELLA STAMPANTE
firstlele77 Wrote: ------------------------------------------------------- > 3ntrlabs precisamo il PTFE a 260 °C non subisce > alcuna degradazione ma solo una lieve deformazione > termica. Questo e' uno dei casi in cui le MSDS (DuPont & co..) non sono la bibbia. Sono anni che si dibatte sull'innocuita' del Teflon, e sono anni che ad esempio si sa che le esalazioni del teflon a paby 3ntrlab - Discussioni generali - NO PROBLEMI DELLA STAMPANTE
I find it quite amusing that while I am running to make a good quality printer to sell, splicing cents yet keeping quality as #1 priority, those guys are asking 500$ more for a different color scheme (i.e. blue-tinted perspex instead of ...) of a printer that has yet to materialize. Again, I wonder why there is no youtube teaser of this "awesome" technology.by 3ntrlab - Developers
rsilvers Wrote: ------------------------------------------------------- > 180F is no hotter than an attic can get, or a car > dashboard in the summer. 180 F is 90% of the T required to boil water. Is your attic really that hot ? Anyway, I wouldnt' dry *any* filament on my oven. I like my pizza to taste tomato, not an unknown oil from overseas. :-) And there are plenty of cheap semi-toyby 3ntrlab - General
rsilvers Wrote: ------------------------------------------------------- > True, but I am printing novelty gears and vases > with it, not aerospace parts or medical implants. > People here make 3D printers from materials > completely inappropriate for such use, such as > ordinary threaded rod and nuts instead of ball > screws and ball nuts. So experimenting with > alternate mby 3ntrlab - General
If I understand well, the machine tells to the pc to pause the machine. No way to bypass the PC (i.e.: when printing mulitple copies from onboard sd card) ? Bye Davideby 3ntrlab - Repetier
Was thinking to put a microswitch to detect end-of-spool conditions to avoid ruining a print while out for lunch. Thank you anyway. Davideby 3ntrlab - Repetier
Is it possible to link one input pin to IMMEDIATE pause/restart of printing job (not waiting for the cache to be emptied) ? Thank you! Davideby 3ntrlab - Repetier
thejollygrimreaper Wrote: > > he has released a rough drawing on his site, > however if anything i would urge him not to > release it at all, given that the moment he does > every clone shop will be in on it to make a quick > buck with no actual contribution to the reprap > community, > > i gotta ask though why on earth would you try and > make it? why not just buby 3ntrlab - General
Obviously each axis is being moved from associated arrow icons. Therefore the mental picture of moving Z is Extruder assembly on sliding-bed architectures, or the bed itself when it is a lifting-bed architecture. Surely getting too much options can be confusing (skeinforge docet), but right now Repetier host is quite spartan about options, therefore I don't see any risk to increase complexity.by 3ntrlab - Repetier
ShadowRam Wrote: ------------------------------------------------------- > Configuration.h in your firmware. > > There's a line in there to invert the direction of > each Axis. Won't do it. My homing switch is at Zmax position. Now when Z=0 bed touches extruder. If I invert, Z=0 will be at Zmax..... Host sources: could be a solution , but will take me a lot of time to dig into soby 3ntrlab - Repetier
Really nothing to do ? Or I am sooooooo desperately dumb not to see an obvious solution ? :-) Davide Ardizzoiaby 3ntrlab - Repetier
Hello all, I am working on a moving Z plane printer, much like Makerbot or Ultimaker setup. I have no problem with Repetier Host + FW, everything is working OK, I just would like to reverse the action of + and - Z buttons to match the real thing, so when I hit the "up" button, the bed will go up. Z bed is at zero when all up (against extruder), and at 200 when all down. Is anything I can doby 3ntrlab - Repetier
*if* you are using Repetier firmware, there is a HEATED_BED_MAX_TEMP setting somewhere into config.h. HTH, Davide Ardizzoiaby 3ntrlab - Repetier