Show all posts by user
General discussions. For specific printers / electronics / fabrication methods / softwares, please see other sections.
Re: [AU] 3mm PLA For Sale - 15 years ago
Schulz Wrote: ------------------------------------------------------- > Hi! > > Was wondering, do I get a discount if I buy 5 or 6 > rolls?, also is it possible to pickup? > > thanks! > Schulz sorry, all sold Auzzeby Auzze - For Sale
May's get togrther/BBQ - 15 years ago
HI.. Just wondering if we are having a meeting in May, as this will be 2 months since we last got together. 1 st MAy or later in the month?? Auzzeby Auzze - Australia, Melbourne RUG
Re: Where to Start - 15 years ago
HI.. I still think you can get it cheaper in price.. Same for Gen6 and V5 hotend.. I would go RAMPS with V6 as it is a better hotend has you can change the nozzle later. Hardware can be got from emaker.com for about $35.00 plus shipping. bets and rods aswell.. We all like to push suppliers we use but if you take the time and shop around you can do it on the cheap but if money is no problem theby Auzze - Reprappers
Re: Where to Start - 15 years ago
HI.. Now this is where I'm very bias, I run RAMPS and never have try anything else. (it just woked the first time out) You can pick-up a Mega 1280 of E-Bay for about $25.00 to $30.00, a bear PCB $10.00, parts about $20.00 plus you need the Pololu which we set you back about $50.00 (make sure you get heat sniks for the chips). For the stepper motor connecting you can use a sevo type unit or theby Auzze - Reprappers
Re: Where to Start - 15 years ago
Hi Chris I think you will find that there are better docs for the Prusa than the Mendel. Disadvantages, no not really other than the PLA bushes, but these can be changed to a bronze bush. I own a Prusa so I'm abit bias, with some of the newer firmware we can print upto 140mm/sec and still get a nice print. As for a hotend, yes by all means make your own but I would buy say a V2 from mendel-paby Auzze - Reprappers
Re: Where to Start - 15 years ago
HI.. If you are starting on may I seggest you go for a Mendel-Prusa, you can ether buy printed parts from ebay or via the #repraap channel on irc.freenet.org or you could buy a set of cast parts from (but you will have to drill the holes) or you could try emakershop and buy your printed parts, you can also pickup your hardware and rod kits from the same place. Now form the electronics you canby Auzze - Reprappers
Re: Help with fine tuning Prusa Mendel - 15 years ago
HI.. If you are using a prusa your Z axis in the firmware should be set to about 2650 whuch should give you 1mm of movement when you push +1. If SF40 you need to tick limit and make both 1.0, this mean that if the part is 100mm high it should print to 10mm. Auzzeby Auzze - Australia, Melbourne RUG
Re: Extruder HOTENDS -Sold out, More on order - 15 years ago
Hi.. I have sold all stock, but I have some more on order. I wil re-post when I have more stock Auzzeby Auzze - Australia, Melbourne RUG
[AU] 3mm PLA For Sale - Soldout - 15 years ago
HI.. I have some rolls of Vik's PLA for sale. These rolls are 100 mtr and weigh about 900grams, just reducing stock. Colours are Yellow Blue Purple Brown Green $30.00 each plus postage to anywhere in Australia If intrested please send me a message here and I will get back to you. Auzzeby Auzze - For Sale
3mm, PLA - Sold Out - 15 years ago
HI.. I have some rolls of Vik's PLA for sale. These rolls are 100 mtr and weigh about 900grams, just reducing stock. Colours are Yellow Blue Purple Brown Green $30.00 each plus postage to anywhere in Australia If intrested please send me a message here and I will get back to you. Auzzeby Auzze - Australia, Melbourne RUG
Finshed - 15 years ago
HI.. I have for sale some endstop kits. These are suited to the RAMPS board. Each kit has 3 microswitches with 300mm of cable and servo style plugs. Price is $12.00 posted anywhere in Australia or $15.00 overseas. If intrested please connect me here. Auzzeby Auzze - Australia, Melbourne RUG
Re: Getting extruder to extrude - 15 years ago
HI What plastic are you using, if it's ABS you will need about 230-250C but PLA should melt at 180-190C. Just check to make sure the nozzle is not blocked or the feed stock is not to tight in the barrel hole. Auzzeby Auzze - General
Re: Start up settings - 15 years ago
ajm11 Wrote: ------------------------------------------------------- > -How far do you set the tip of the extruder from the print plate at your z home? Should be about .2mm, as you should also set your layers to .4mm. At .2mm this will make the plastic stick to the bed. > -How do you get the stuff to stick to the plate, mine just gobs out and drags around. You can use blue builders tape orby Auzze - Huxley
Finshed - 15 years ago
HI.. I have several complete extruder hot end kits for sale. Kit includes V2 Hot end (0.5mm nozzle) Alum heater Block and resistor kit (+ spare resistor) 100K Themistor Price is $35.00 each including postage to anywhere in Australia If interested please leave a PM here and I will get back to you. Hotend Kit Auzzeby Auzze - Australia, Melbourne RUG
Re: Huxley questions - 15 years ago
Chillance Wrote: ------------------------------------------------------- > Auzze Wrote: > -------------------------------------------------- > ----- > > Chillance Wrote: > > > -------------------------------------------------- > > > ----- > > > Actually, now I'm leaning towards the Prusa > > Mendel > > > model... > > > > Now yby Auzze - Huxley
Re: Huxley questions - 15 years ago
Chillance Wrote: ------------------------------------------------------- > Actually, now I'm leaning towards the Prusa Mendel > model... Now your cooking... I have a Huxley and a Prusa. The Prusa is the better printer. Auzzeby Auzze - Huxley
Finshed - 15 years ago
HI.. I have a small supply of Hobbed Bolts for the wade extruder, each bolt comes with 2 nuts and 3 washers. (These are made on my lathe and I use them) Hobbed Bolt Cost is $10.00AU which includes postage in Australia. If interested please e-mail me @ auzzemit@gmail.com and I will get back to you with payment deby Auzze - Australia, Melbourne RUG
Re: PARTS WANTED - 15 years ago
HI.. I have a working Prusa.. Great choice in more ways the one. It's a lot cheaper to build, easy to setup and simply to get printing, once you have SF set right. The only problem I had was wobbley Z screws, to fix I cut 2 slot on the other side with a hacksaw blade to the depth of the blade. Also use soft spring for the M8 traped nut on the X axis.. Happy to help, just ask. Auzzeby Auzze - Australia, Melbourne RUG
Re: Group catch-up - 15 years ago
Hi.. Big thanks to Cefiar for hosting the meet-up. It was great to catch-up with Cefiar and Scorpia as well as to meet Mark the maker of the Repic alll in one control system. The afternoon was fill will reparap talk and some show and tell. 3 printers where on show, Cef's Mendel, Scorpia's wolfstrap, which looked diffrently intresting and great at the sametime and I had my Prusa on display (didby Auzze - Australia, Melbourne RUG
Re: Which stepper from pololu - 15 years ago
I.. OK, the first ones are NEMA 17 which are mianly used for the Mendal, Prusa. The second ones are NEMA 14 which are used for the Huxley. Hope that helps Auzzeby Auzze - General
Re: Group catch-up - 15 years ago
HI.. I hope to bring my Prusa and Huxley... Just hoping the weather is good. See you all Sunday Auzzeby Auzze - Australia, Melbourne RUG
Re: WITHDRAWN - sorry - 15 years ago
HI.. I was luck too get them local here in Ballarat, but i think the Alum was an off cut. Auzzeby Auzze - Australia, Melbourne RUG
Re: Heated Bed special buy - 15 years ago
Hi.. We are very close to having 5 but as this has taken so long to get 4 I have been working on building a heated bed using 2mm Alum with 4mm Glass top, using 8 1.2ohm 10watt power transistors running from a PC PS. Total price $18.00. As I have 2 printers I have been able to build 2 HB for the price of one PCB. So I feel the price is way to high and have decided to withdraw this offer. Auzzeby Auzze - Australia, Melbourne RUG
Re: Replace table with a convayor belt - 15 years ago
HI.. I think this can be done by using a belt built into the frame, so much so I have been working on some printed parts to do so. Once I have one of my printers works 100% I will print of the said parts and do some testing. More later. Auzzeby Auzze - Developers
Re: Bits and pieces - 15 years ago
Hi.. I have been using this. Cost $10.00 a tube They do mail order.. Auzzeby Auzze - Australia, Melbourne RUG
Re: print bed flatness or lack of - 15 years ago
Hello I just use a peice of 4mm glass on my 2mm Alum heated bed, I also have some small thumb wheel that I use to adjust the height. All works out well. Auzzeby Auzze - General
Re: Huxley Build - 15 years ago
HI.. My Huxley is all built and printing. I just have to works out some software problems but I'm very happy All finshed I went with a mini wade , works very well Thanks Auzzeby Auzze - Huxley
Re: huxley using mendel boards? - 15 years ago
Hi If you are talking about the electronics, then YES.. If you are talking about the thick/thin sheets, then no. Auzzeby Auzze - Huxley
Re: Cost of printing a mendel? - 15 years ago
Hi.. I think if you wait a few more months you may find the prices dropping even more.. There are a heap of people who are geeting very close to finshing they bots off and to help off set the cost they may just print some set of and sell them. Plus with the Prusa you can pick-up a set of parts for $120.00... Auzzeby Auzze - General
Re: Tim Schmidt RepSnapper builds - 15 years ago
Yes, when are we going to get a newer window version.. Anti-ozzzzz would be great plus some fine turning of the print settings.. Not everone runs Linux.. Auzzeby Auzze - RepSnapper