Show all posts by user
Page 1 of 1 Pages: 1
Results 1 — 3 of 3
Hey Guys,
Not quite a bed height issue, if it was then it would've been an issues from the first layer.
The speed hypothesis is a pretty good guess though.
I personally thought it may have been that they turns for lifting is a bit off, but I did test that too.
Although:
Anywho, I did eventually find the problem:
It was extruding too rapidly: My extruder stepper calibration in the firmware
by
freddied
-
South Africa, Cape Town RepRap User Group
Hi Guys,
So I've got my printer up and running, and got the first prints started. The XY&Z calibration is good. The problem I'm having is that the extruder head gets pushed into the print after around 7mm of printing, which utterly destroys the prints. Any advice as to what to look at? I've tried adjusting the layer height, but no luck. I'm using marlin firmware & the repetier host. I've
by
freddied
-
South Africa, Cape Town RepRap User Group
Hi Guys,
I'm on the cusp of ordering parts for a Prusa i3 build. I'm in Cape Town, and will be building the system over the next three months. I'd be very interested in meeting fellow reprappers around here and will probably need some help and advice.
If anyone is interested in a meetup some time, let me know (I might even by you a beer
by
freddied
-
South Africa, Cape Town RepRap User Group
