Show all posts by user
(RepRap en Français)
Page 1 of 1 Pages: 1
Results 1 — 3 of 3
Hi All, I have been playing with the Slic3r Configuration - Printer Settings - Custom G-code..... and have edited it with the following code:
Start G-code:
G1 Z5 F3000 ; Move Hotend up off bed.
M106 S153 ;turn fan on 60% (100% speed = S255)
M109 S ;set extruder temp and start heating
G28 X0 Y0 ;home X and Y
G29 ;probe bed
G90; set absolute coordinates
G92 E0; reset extruder distance
G1 Z3 F300
by
Mark_K
-
RepRap Groupe d'Utilisateurs Francophone
Serge, I am waiting for my Purple kit - maybe you sent mine to Aze?
All: If are printing my fan cover, , you should not require any support. It should be printed with the "Smartrap" logo side on the glass.
shoutr : I did also notice the printer was noisy when printing the side walls - doing infill - I think I will try some tests with changing the wall thickness to solve that problem. Thanks fo
by
Mark_K
-
RepRap Groupe d'Utilisateurs Francophone
Hi All, I have been working on a Fan Duct for the Huxley Hot-end, to direct the air from the fan to the nozzle and build platform.
You can view and download it if you like from:
Hope it helps with your smaller prints.
Cheers Mark
by
Mark_K
-
RepRap Groupe d'Utilisateurs Francophone