Show all posts by user
(RepRap en Français)
Re: Problème impression micro-delta (photo) - 10 years ago
Moi je dirais problème d'extruder ...by lolocaledo - RepRap Groupe d'Utilisateurs Francophone
Re: FTP connection on Duet RESOLVED - 10 years ago
Sorry, After some tests login "reprap" password "reprap" I tried with Preprap :-(by lolocaledo - Duet
FTP connection on Duet - RESOLVED - 10 years ago
Hello, how to configure the FTP connection on duet controller ? I have the following in config.g : M550 PDELTALolo ; Machine name and Netbios name (can be anything you like) M551 Preprap ; Machine password (used for FTP)by lolocaledo - Duet
Re: Thermistor, thermocouple or PT100? - 10 years ago
Hello, Can we use these models of PT100 ? and this oneby lolocaledo - Duet
Re: Thermistor, thermocouple or PT100? - 10 years ago
Hello, Where can we order the RTD board ?by lolocaledo - Duet
Re: Duet WiFi details published, pre-order window open - 10 years ago
Hello, I've just pre-ordered one :-)by lolocaledo - Duet
Firmware upgrade - 10 years ago
Hello, I remember to read something about the possibility to upgrade the firmware from Web interface. Witch version of firmware is necessary to do it ?by lolocaledo - Duet
Re: Duet development news - 10 years ago
Hello, I do not know the status of the project of the new Duet card but would not it be interesting to have two SD card reader? One for both firmware and another to store GCODE files. We could have multiple SD cards for storage of files GCODE to classify and identify. Just an idea :-)by lolocaledo - Duet
Max capacity of SDCARD - 10 years ago
Hello, what is the max capacity we can use with Duet controller ? Is there a brand better than other ?by lolocaledo - Duet
Duet with cartesian printer - 10 years ago
Hello, I'd like to use one Duet one my new cartesian printer. All is ok for the configuration except for the auto level ! how to setup auto level on cartesian printer with mini Z IR sensor ? Thank you for your help Laurentby lolocaledo - Duet
Re: About DC42 version - 10 years ago
Hello, Thank you very much for these informations.by lolocaledo - Duet
About DC42 version - 10 years ago
Hello, I'm a little bit confused with all these versions :-) Is DWC 1.11 include in DC42 version ? if so, from what version is it included ? And can we use all last version 1.12, 1.12a and 1.13Beta on 0.6 Duet too ? Thank you for your helpby lolocaledo - Duet
USB connection - 10 years ago
Hello, Is it possible to connect to Web interface on Duet (0.6 or 0.85) without power supply connected, only USB connection ?by lolocaledo - Duet
Re: Mount a Kossel XL - 10 years ago
Hello, I actually build my second Kossel with 2040 extrusion and Robotdigg's aluminum corner for 2040. Very strong and rigid. About the controller, I definitely use DUET for all my printers (Delta and cartesian). Some reasons : first the web interface, very helpful to control printer without USB connection. You can either use ethernet cable or Wifi connection with tablet. second : the PanelDueby lolocaledo - Delta Machines
Re: Buy Aluminum extrusion - 10 years ago
Hello, I've ordered all my aluminium profile to www.openbuilds.com. Good price and quick shipment. You can find aluminium on AliExpress but for a big quantity.by lolocaledo - Delta Machines
Re: Duet commissioning - 10 years ago
Tu détermine ton Z offset en ligne de commende et tu edite le fichier config.g en ajoutant : G31 X0 Y0 Z(valeur relevée) P500by lolocaledo - RepRap Groupe d'Utilisateurs Francophone
Re: Duet commissioning - 10 years ago
La seule ligne à editer est G31 X0 Y0 Z(valeur relevée) P500 une fois que tu as déterminé ta valeur de l'offset.by lolocaledo - RepRap Groupe d'Utilisateurs Francophone
Re: Duet commissioning - 10 years ago
Bonjour, Non, l'idéal est de le placer à environ 1,5 à 2 mm de ta buse. Tu défini ensuite cet écart dans le fichier config. Pour le mesurer, tu fais le réglage du zéro avec la feuille de papier. Une fois que ta buse grippe tout juste le papier, tu tapes G92 Z0 Ensuite tu remonte ta buse ex. G1 Z30 puis tu fais un G30 dés que le détecteur est actif, tu lis la valeur de Z sur l'interface Web et tuby lolocaledo - RepRap Groupe d'Utilisateurs Francophone
Re: Question Delta - 10 years ago
Bonjour, Tu as aussi celui ci pour une simulation sous OpenSCAD, je ne sais pas si c'est le même. Une petite question : pourquoi te limites tu tant en heurter ?by lolocaledo - RepRap Groupe d'Utilisateurs Francophone
Re: Help please - can't get good print quality after bed levelling - 10 years ago
I think about a bad extrusion calibration and you print too hotby lolocaledo - Prusa i3 and variants
Re: Duet & Simplify3d - 10 years ago
Hello, Hardware flow control have to be selected in Simplify3D. Do you use Windows or MacOS ?by lolocaledo - Duet
Re: Autobed - Marlin - 10 years ago
Bonjour, Oui c'est dit un peu partout dans les post anglophone :-) dans l'ordre, G28 puis g29 et on imprimeby lolocaledo - RepRap Groupe d'Utilisateurs Francophone
Re: Tips about auto level - 10 years ago
Hello, I decided to do new rods. Mine was built in aluminum and was not with equal lenght. (up to 1mm difference) So I use carbon tube and cut exactly at the same length (about 0.1mm accuracy) Just do that and after the first auto level, I obtain 0.046 RMS deviation Thank you Davidby lolocaledo - Delta Machines
Re: dc42 auto-calibration doesn't go all the way to the bed - 10 years ago
look at height defined in config.gby lolocaledo - Delta Machines
Tips about auto level - 10 years ago
Hello, If I can't obtain less than 0.150 or 0.140 after auto leveling, what can I check on my printer to obtain more accuracy ? Thank youby lolocaledo - Delta Machines
Re: Capteur capacitif , inductif que choisir - 10 years ago
Bonjour, Pour moi le meilleur capteur est celui-ci. Capteur IR de DC42by lolocaledo - RepRap Groupe d'Utilisateurs Francophone
Re: bed en 220 v - 10 years ago
Bonjour, 500W sera largement suffisant.by lolocaledo - RepRap Groupe d'Utilisateurs Francophone
Re: So disappointed with Duet - 10 years ago
When printing, I always have this error message in web interface G-code console : 01:13:47 UTC+11GCodes: Attempt to read a GCode int before a search. 01:11:30 UTC+11GCodes: Attempt to read a GCode int before a search. 01:09:15 UTC+11GCodes: Attempt to read a GCode int before a search. 00:49:01 UTC+11GCodes: Attempt to read a GCode int before a search. 00:45:36 UTC+11GCodes: Attempt to read a GCoby lolocaledo - Delta Machines
So disappointed with Duet - 10 years ago
Hello, I always have my problem with my delta printer. Randomly, the print stops, the head stop to heat. Impossible to restart printing. I have to power off the printer and power on again. I've tried to print with S3D on USB, prints gcode file on Webcontrol and print gcode file on PanelDue (USB and Ethernet disconnected). I've changed the Duet board (v0.6) and upgrade firmware with last versionby lolocaledo - Delta Machines
DC42 firmware for Duet - 10 years ago
Hello, what is about RepRapFirmware-1.09r-dc42 firmware ? Is it the last version we can use ? Thank you Have a nice day Laurentby lolocaledo - Controllers