Show all posts by user
(RepRap en Français)
Re: Impossible d'imprimer en filament flexible - 10 years ago
Oublies le Bowden avec du flexible ..... il faut un extrudeur direct y'a pas d'autres solutionsby lolocaledo - RepRap Groupe d'Utilisateurs Francophone
Re: Quelle architecture technique pour une nouvelle imprimante ? - 10 years ago
Concernant le lit, j'ai un plateau de 330MM silicon 800W en 220V sur ma Delta, je passe à 60°C en 1m30 et à 100°C en moins de 4mn !by lolocaledo - RepRap Groupe d'Utilisateurs Francophone
Re: choix de l'electronique !! - 10 years ago
Autre avantage de la Duet, le firmware du DC42 est aussi optimisé pour les CoreXY, cartésienne et Delta. Réglage des courants par logiciel. Le top du top, un ecran tactile PanelDue en option. Laurentby lolocaledo - RepRap Groupe d'Utilisateurs Francophone
Re: Quelle architecture technique pour une nouvelle imprimante ? - 10 years ago
Bonjour, Pour ce que tu veux faire, je te conseille ce modèle. J'en construit une dés réception de mes profilés. Trés rigide, dimensions à de ton choix et polyvalente, tu peux l'utiliser en CNC Laurentby lolocaledo - RepRap Groupe d'Utilisateurs Francophone
Scaling a Delta printer - 10 years ago
Hi all, Once our printer is calibrated (M665 and M666), is it possible to adjust scaling it without modify calibration ? in other words, my printer is very well calibrated (less than 0.05 after autolevel) but a piece of 5cm is printing 4.87by lolocaledo - Delta Machines
Re: Retract length ... - 10 years ago
Thank you for all these good informations. After some tests, retract for my delta with E3D is 3.5mm at 100mm/S and cost value at 0.4 Have a nice dayby lolocaledo - Delta Machines
Re: New PanelDue touch screen beta firmware - testers wanted - 10 years ago
Quotedc42 Have you powered down/up or reset the PanelDue since you fixed the config file? PanelDue only fetches the name when it starts up. Sure ! I only reset Duet :-( All is ok nowby lolocaledo - Controllers
Re: New PanelDue touch screen beta firmware - testers wanted - 10 years ago
change M550 PDELTALolo in my config.g Title on web interface now is DELTALolo but always "My Re^Rap 1" on PanelDue ... But don't worry, it's not so important for the moment :-)by lolocaledo - Controllers
Re: New PanelDue touch screen beta firmware - testers wanted - 10 years ago
In my config.g, I have M550 DELTALolo but "My RepRap 1" in the title bar on PanelDue. It's the same title in the Web interface.by lolocaledo - Controllers
Re: New PanelDue touch screen beta firmware - testers wanted - 10 years ago
David, Is it possible to change the title in the Red Title Bar on the top of the screen ? And about the move panel, it's fine :-)by lolocaledo - Controllers
Re: Duet stop after 10 or 15mn - 10 years ago
No, head stay where it stop, no retract ... and my iMac does nothing else ! I'll try to print with file on SD card. And on the PanelDue, status is "Idle"by lolocaledo - Controllers
Re: Retract length ... - 10 years ago
n8bot, about coast parameter in S3D, what is the purpose ? I user S3D and I've never used this parameterby lolocaledo - Delta Machines
Re: Using Duet controller for CNC ? - 10 years ago
Thank you very much David. I'll keep you in touch if I meet some problems with these controllers.by lolocaledo - Controllers
Re: New PanelDue touch screen beta firmware - testers wanted - 10 years ago
What do you think about one another page with jog controls ? Something like these pictures.by lolocaledo - Controllers
Re: Using Duet controller for CNC ? - 10 years ago
DC42, do you mean that I have to modify the source code ?? Ouch !! :-)by lolocaledo - Controllers
Re: Using Duet controller for CNC ? - 10 years ago
Hello, I'm planing to use 3 NEM23 step motor. About driver, I've ordered the MKS TB6600 external drivers it's 12-40VDC and up to 4.5A Where is documented M569 command ? Have a nice day Laurentby lolocaledo - Controllers
Re: Duet stop after 10 or 15mn - 10 years ago
Hello, Only printed from computer. I haven't tested the SD yetby lolocaledo - Controllers
Duet stop after 10 or 15mn - 10 years ago
Hi all, I have a strange behavior with my Duet. All works fine however, with all my printings, after 10 or 15mn, the print stops ..... 10 or 15s without moves and then continue to print the job without error. Any ideas about that ? Laurentby lolocaledo - Controllers
Using Duet controller for CNC ? - 10 years ago
Hi all, Is it possible to use Duet controller for CNC ? Generally, the endstops aren't used on CNC and we have to define "zero" home manually when the piece of metal is in place. Can we use G92 X0 Y0 Z0 as equivalent ? Is it the same G-CODE ? Thanks Laurentby lolocaledo - Controllers
Retract length ... - 10 years ago
Hi all, On your Delta printer with bowden extruder, how much is your retract length ? I've read somewhere that 2mm was the max length on direct extruder but I think it could be more on bowden due to the flexibility. Have a nice day Laurentby lolocaledo - Delta Machines
Re: Last problem to resolve ... - 10 years ago
Effectively, TO and T1 was inverted in S3D :-) thank you very much David I wanted to thank you for all your work and documentation on your website. That's been a lot of very appreciable informations for me. My Delta is my first 3D printer DIY and all run like a charm. As soon as possible, I'll post a complete information about my delta construction and some pictures. After testing many controlleby lolocaledo - Delta Machines
Re: quel est le meilleur trancheur slic3r vs simplify 3d ? - 10 years ago
Bonjour, J'utilise S3D depuis pratiquement mes débuts en impression 3D. C'est vraiment un logiciel très pratique, très facile à utiliser. De plus, il génère les supports comme aucun logiciel ne le fait. Certes un peu chère (145us$) mais quand on a mis beaucoup plus pour fabriquer une belle imprimante, c'est un très bon investissement. Si tu as le budget, n'hésites pas un instant.by lolocaledo - RepRap Groupe d'Utilisateurs Francophone
Re: Last problem to resolve ... - 10 years ago
Hello, this one is the last file used, it generated the error too. and my config.g if it can give you another informationby lolocaledo - Delta Machines
Last problem to resolve ... - 10 years ago
Hello, I'm using Simplify3D software on my Delta. Duet controller and PanelDue, mini Z sensor and by following all informations from David, I obtain a very good accurate on my printer. Calibrated 6 factors using 13 points, deviation before 0.108 after 0.035 To print, I do the following : On web interface, I define hot end temperature and bed temperature. When temperatures are reached, I launchby lolocaledo - Delta Machines
Re: choix de l'electronique !! - 10 years ago
Bonjour, Pour moi le meilleur choix aujourd'hui est le contrôleur http://www.replikeo.com/fr/electronics/18-duet-board.html]Duet 0.6 de chez Replikeo à 49.90us$. Processeur 32 bits, port Ethernet avec une interface Web disposant de beaucoup de fonctionnalisés intéressantes. Utilise le firmware RepRapFirmware ou celui de DC42 qui a été optimisé pour les Deltas. Tu trouve son firmware a cette adrby lolocaledo - RepRap Groupe d'Utilisateurs Francophone
Re: When to use - or + with M666 - 10 years ago
Hello, The last thing I have to setup is the scale. What is the parameter to modify to have a correct scale ?by lolocaledo - Delta Machines
Re: When to use - or + with M666 - 10 years ago
Hi all, One question about H parameter in G30 command : do I have to give the real Z probe threshold to H for each point or the delta Z probe with correct Z probe ? For example : all center Z probe threshold are 1.45. For Z probe threshold at 1.75, H will be 1.75 or 0.30 ? Thank you for your help Laurentby lolocaledo - Delta Machines
Re: When to use - or + with M666 - 10 years ago
Hi all, Ok thank you. so now, after doing all calibration procedure again from scratch, after G28 and G32, I've the following auto level result : "21:53:40 UTC+11G32 Calibrated 7 factors using 13 points, deviation before 0.178 after 0.014" Just only one thing to resolve : all probe points (7) in the center have 1.45 for Z probe threshold however all probe points (6) on the bed periphery (near tby lolocaledo - Delta Machines
When to use - or + with M666 - 10 years ago
Hi all, To be sure, what are the M666 parameters when I measure X,Y and Z tower : X -0.35 Y +1.10 Z -0.95 I am tempted to say M666 X0.35 Y-1.10 Z0.95 is it right ? After reading many posts, it begin to be confused for me :-)by lolocaledo - Delta Machines
Re: I'm pretty pleased with my delta calibration. - 10 years ago
Dear n8bot, I noted in your different posts tha you use Duet0.85 with Simplify3D. It's my configuration. However, I got to some difficults with S3D and temperature control. If I define Bed temperature and hot end temperature in S3D setup, when I launch the printing, hot end and bed don't warm up. I have to define and start the hot end's temperature in the webinbterface on the Duet controller anby lolocaledo - Delta Machines