Show all posts by user
Anything related to printer controllers not being Duet, RAMPS or Sanguinololu: microprocessors, motor and heater driver circuitry, gEDA/KiCAD issues, soldering tips, etc.
Re: CoreXY e Cartesian - 9 years ago
per favore, avete un quadro dove posso vedere, è il sensore di stop per z motore sul ultimaker 2 Devo capire come è definita sulla ultimaker firmware del movimento su z. Credo che sia sulla mia stampante - devo cambiare la posizione per la fermata Z verso il basso sulla scala (ora è in alto), E devo cambiare la polarità del motore z, per invertire in giù, e giù verso l'alto (+ - + - a - + - +)by tomi01_2000 - Stampa 3D per principianti
Re: New MKS SBASE Smoothieware-compatible board from China - 9 years ago
please, do you have a picture where i can see where, is the stop sensor for z motor on ultimaker 2 I have to understand how it is defined on the ultimaker firmware the movement on z. i believe that's on my printer - i have to change the position for the stop Z down on the scale (now it's on top), and i have to change the polarity for the z motor, to reverse up in down, and down in up (+ - +- inby tomi01_2000 - Controllers
Re: New MKS SBASE Smoothieware-compatible board from China - 9 years ago
Quotedintid How did you figure it was this piece? Asking as I have a dead Y axis. Both the driver AND external output pins and my Z-driver is having issues as well. Z-driver external pins Works fine though. . the small piece was burned, and it smoke after that the mboard no longer feeds/ no more light / led / etc - nothing. Zero! I have an multimeter no power on mboard ... Quotedintid You can dby tomi01_2000 - Controllers
Re: New MKS SBASE Smoothieware-compatible board from China - 9 years ago
the motherboard it's dead. i 've been conected the motherboard on win10 ... and with pronterface, i start to move on x my motor. Imediatly boom - and the motherboard - was black. the piece dead it's marked on red in the photo anyway, i have received a ultimaker 2 motherboard. For this mb, i changed the sensors temp heater and bed. Still have trouble on z - now i print in the air not on the bed!by tomi01_2000 - Controllers
Re: New MKS SBASE Smoothieware-compatible board from China - 9 years ago
testing network i try on config.txt: return_error_on_unhandled_gcode false # # network settings network.enable true # enable the ethernet network services network.webserver.enable true # enable the webserver network.telnet.enable true # enable the telnet server #neby tomi01_2000 - Controllers
Re: New MKS SBASE Smoothieware-compatible board from China - 9 years ago
on linux mint.... nothing's changeby tomi01_2000 - Controllers
Re: New MKS SBASE Smoothieware-compatible board from China - 9 years ago
it is clear for me, i don't have the good settings on my firmware ... i have to study very well all the functions / syntax / language - for a well configuration on config.txt i saw on config.txt 1 # Stepper module configuration microseconds_per_step_pulse 1 # Duration of step pulses to stepper drivers, in microseconds base_stepping_frequencyby tomi01_2000 - Controllers
Re: New MKS SBASE Smoothieware-compatible board from China - 9 years ago
QuoteAlexus12 ..Try to set uart0.baud_rate 250000 in your config file, and change it in the Pronterface. Can you move axes using display? change it to 250000 in config and Pronterface No changes Imposible to move axes On Pronterface i have "Motors off" on the screen. I try it to use the network using network.ip_address on config, \\192.168.1.200, and on my network imposible to find this ipby tomi01_2000 - Controllers
Re: New MKS SBASE Smoothieware-compatible board from China - 9 years ago
Quotedintid Have you setup firmware? Or you can just put firmware.bin and a sample config.txt file on the SD Card and boot Sbase Card You can not connect to the board untill you get some firmware on it. Look at your SD Card and make sure you have a "firmware.cur" file on it after flashing it. Edit: If you have flashed it and it seems you have connected it properly I would try a different PC anby tomi01_2000 - Controllers
Re: New MKS SBASE Smoothieware-compatible board from China - 9 years ago
Quotedintid Quotetomi01_2000I am trying to connect printer on computer using cable usb, and the computer it start to install the driver - automatically. On Pronterface - i try to connect, and i have "connecting...". And even if i wait 10 min nothing's happened. Seems like you are using the wrong COM port. You should check in Device Manager if using Windows Source: •At a command prompt, in theby tomi01_2000 - Controllers
Re: New MKS SBASE Smoothieware-compatible board from China - 9 years ago
Quotezylantha Quotetomi01_2000 i'm not able to write a good firmware on the motherboard .... I'm afraid that you'll need to provide more information if you are really seeking help here (although you seem to have already switched boards). Anyway, the most obvious (and easiest to solve) issue with getting the Smoothieware firmware to update and work is to ensure that you have formatted your Micby tomi01_2000 - Controllers
Re: New MKS SBASE Smoothieware-compatible board from China - 9 years ago
i'm not able to write a good firmware on the motherboard .... i ordered this - Ultimaker-2-Kit-Ultimaker-V2-1-1-Controller-Board-OLED-Display-Adapter on ebay.fr - because last version of this ultimaker motherboard it is compatible with Cura 15.06.3. And this version of Cura it let me write his firmware directly, without to modify a config.txt or any other filesby tomi01_2000 - Controllers
Re: New MKS SBASE Smoothieware-compatible board from China - 9 years ago
please, is anybody who have an pdf with explications for config.txt? to light me up exactly the values for all the settingsby tomi01_2000 - Controllers
Re: New MKS SBASE Smoothieware-compatible board from China - 9 years ago
Quotedintid You do not need LCD. I'll recommend using the MKS 28 or 32 boards.. very slick touch-screen which aren't more expensive than the old lcd types. How do you try to make firmware? Firmware is literally a .bin file and a .txt file. I have made an Instructables you might find usefull: Configuring MKS Sbase v1.2 32-bit Controller basics and intro to Smoothieware. How do you connect? Proby tomi01_2000 - Controllers
Re: New MKS SBASE Smoothieware-compatible board from China - 9 years ago
i have a dead 3d printer buy it from here the initial motherboard was with problems - problems on axe x, i changed the mb with a second, same model, from China (new problems - imposible to build a cube of 1 cm - always is making 0.5mm on axe Z) ... imposible to find a firmware/ CMOS able to modify the errors Now, i try to change my printer on a smothie system - motherboard. The same mb likeby tomi01_2000 - Controllers