Die PCBs lassen ja noch ein paar Wochen auf sich warten. Bleibt es bei dieser Liste? ConnyCola PCB Liste: 2 Stück Batun 1 Stück loco 2 Stück PeterKu 2 Stück The Hidden Oder möchtet ihr euch hier anschliessen: ? Nicht falsch verstehen, ich hab dieses Set PCBs bestellt und brauch nur eine. Der Rest würde hier vergammeln. Ich geb die gerne ab. Wollte nur nochmal darauf hinweisen, dass es noch daby danielis - Elektrik & Elektronik
Das sieht eher danach aus, dass eines der Anschlüsse des Thermistors Kontakt zum Hotend bekommt. Oder es besteht ein anderweitiges Kontakt- oder Masseproblem. Hatte ich auch. Noch wilder wird das dann während dem Druck. Man stelle sich den Aufbau der Heizung im Hotend vor. Das ist meist irgendwas mit einem aufgewickelten Widerstandsdraht. Diese 'Spule' induziert kräftig in das Metall des Hotendsby danielis - Elektrik & Elektronik
Den Warenkorb kann ich gerne noch anpassen. Wie ist es mit sowas? Wäre gleich auch ein Kabel dabei. Ich finde nur keine Daten zu Leitungsquerschnitt usw.: ConnyCola PCB Liste: 2 Stück Batun 1 Stück locoby danielis - Elektrik & Elektronik
Hab mir gerade mal diesen ominösen backlight bug auf der ConnyCola PCB angeschaut. Es kann entweder pin5 verwendet werden, dann braucht man die Beschaltung mit T3 nicht. Dann liefert aber der arduino den gesamten Strom für das backlight. Denke mal das ist zu viel auf Dauer für ihn. Oder man wechselt im Code einfach auf pin7 und dann wird der Strom für das backlight vom T3 geschaltet. Und noch waby danielis - Elektrik & Elektronik
Die ConnyCola PCB-Liste: 2 Stück Batun 2 Stück hV47 ... was ist das für ein Name ;-)by danielis - Elektrik & Elektronik
Also die Stecker und Buchsen von Amazon halte ich ein bisschen overdressed. Mit einer Änderung am Gehäuse würde der hier auf die Platine passen: Aber das Kabel ... da bleibt eh nur Conrad über. Im Reichelt Warenkorb ist schon der Ein/Ausschalter, bis auf die 12 Buchse alle anderen Buchsen und Stecker und auch das Poti.by danielis - Elektrik & Elektronik
Der Warenkorb bei Reichelt ist für die Bestückung der ConnyCola Version. Die Teile sind im 0603 Format und nicht 1206 - Vorsicht. Es soll aber Menschen geben die haben schon 1206 Bauteile auf 0603 pads gelötet.by danielis - Elektrik & Elektronik
So die erste Nachfrage nach einer PCB kam schon. Ich fange somit mal eine Liste an: 2 Stück Batun Wie gesagt, ich kann nicht genau sagen welche Stückzahl ankommt. Daher wer zuerst kommt ... Ach und wegen dem Preis. Ich mach da nicht rum, eine freiwillige Spende dachte ich.by danielis - Elektrik & Elektronik
Ja und soweit ich verstanden habe hat es nicht den Bug mit dem FET, dafür vielleicht einen an der backlight Ansteuerung, muss ich mir anschauen. Hier der Warenkorb bei Reichelt: Das Kabel hab ich trotz langer Suche nicht gefunden, auch nichts vergleichbares. Auch keinen perfekt passenden Stromstecker für die Geräterückseite. Entweder das Gehäuse neu machen oder, wegen dem Kabel finde ich eh keinby danielis - Elektrik & Elektronik
Falls jemand Interesse hat, ich hab bei dirtypcbs dieses protopack (10 Stück +-) bestellt. Es ist dieses board: Mal sehen wie viele ankommen. Brauche nur eines und gebe den Rest gerne ab. Bestellt hab ich am 9.4., hier der Statuslink Keine Ahnung wann die kommen. 1-8+ Wochen ist die Angabe. Bei einer Sammelbestellung der restlichen Kleinteile wäre ich gerne dabei. Werde heute noch meinen Reichby danielis - Elektrik & Elektronik
Mit welcher Füllung werden die Dämpfer gedruckt? Sind sie zweiteilig? Kannst du die Quelldateien bereitstellen?by danielis - Mechanik
Hallo badsmoke, ich habe ein komplett geschlossenes Gehäuse. Alle Motoren sind innerhalb und keiner wird zu heiß. Die Steuerung, Netzteil und Display sind aber außerhalb. Wie heiß wird der Motor denn? Der verträgt schon was. In meinem Gehäuse bekomme ich so um die 45° hin. Ein Motor mit 60° beunruhigt mich noch lange nicht. Man kann ihn aber schon kaum mehr länger anfassen. Aber deshalb verlierby danielis - Projekte
Wenn der Arduino mit 12V an Vin läuft dann ist sein 5V-Regler iO Liegen 12V an Vin am Arduino an wenn 12V über den Ramps angeschlossen? Prüfe die Diode D1 am Ramps.by danielis - Elektrik & Elektronik
Display wird dunkler deutet auf Masseprobleme oder sonstige Probleme der Stromversorgung oder der Versorgungsleitungen hin. Ich mach zb. auch immer noch eine gesonderte Masseleitung vom Netzteil an einen Massepin an den Termistoranschlüssen um eine stabile Masse zu haben. Du meinst das leise feine Zwitschern wenn das Ramps bestromt wird aber die Motoren gar nicht drehen. Das hab ich auch, komischby danielis - Elektrik & Elektronik
Keine Ahnung warum, aber mit den TMC2100 brauchen meine Motoren weniger Strom. Schau auch mal Thomas Sanladerers Youtubekanal an, er hat das so auch festgestellt.by danielis - Elektrik & Elektronik
Im ursprünglichen Zustand hattest du 1,4 V gemessen. War bei mir auch so. Das heisst aber die Treiber sind so ziemlich am oberen Anschlag. Das schadet denen nicht. Wenn sie zu warm werden regeln sie ab bzw. schalten ab. Das bedeutet die Motoren dürfen nicht zwitschern, die müssen laufen. Zumindest eine Weile bis ein Treiber weil überhitzt abschaltet. Homing ging ja wohl auch? Ich versteh nicht waby danielis - Elektrik & Elektronik
Höheres Microstepping ... Dachte ich auch und hab meiner Rappelkiste anstatt 4988 die 8825 verpasst, danach war er lauter. Im nachhinein auch klar weil mit steigendem Stepping das Moment dramatisch abnimmt und entsprechend mit dem Strom nachgeregelt werden muss, ausserdem brauchen die eine Ansteuerzeit von 2 µs. Das ist mit Marlin nicht so einfach, mit Repetier dagegen kein Problem. In meinem Falby danielis - Elektrik & Elektronik
... but for ABS you don't want to use the fan.by danielis - Mendel90
I use 4 x 6 mm. A common size in germany. That is only 0.15mm wider. And the thicker outside is even better as it is much more stable and there is no way that it can slip in the wades block. I got mine from here:by danielis - Mendel90
I received the PCB from you. Thank you for the fast delivery. You were right, there was some melted something on the termistor wires. Although the nozzle was wrapped with several layers of Kapton and several Layers of PTFE (it was not the red silicon? self fusing one - but now it is there). But I am wondering, because after removing the layers of PTFE and Kapton the head was clean except a smallby danielis - Mendel90
Hi, I was using smoothieware on a azsmz with silentstepsticks for some month. I love it and want it back. Before azsmz I had ramps with glcd. Was using the newest Marlin and did a lot of long prints (most of them lamp shades) with up to 16h. My frame for the mende90 (you can see it on thingiverse) was only one plate and it took 24h. Barely issues with long prints with ramps and Marlin. Also wiby danielis - Mendel90
Hi sharonf88, I do not have a Melzi and can not test this, but the manual says: ... copy Windows/arduino-1.0.1/hardware/Melzi folder from the SD card to ... That is from the descritpion of Ubuntu. But if you copy that folder to your 1.0.6 Arduino installation on your Windows PC it should work. Larsby danielis - Mendel90
Look here: scroll down. Nophead has created a branch in his repository for E3D.by danielis - Mendel90
Hi, I can print that for you if you like. It will be shipped from germany. I faced the same as you and even now I do not have printed that clamp but am still using the gauge. I took a 6mm peace of plywood and cut it to the size that it fits under the x-carriage. Drilled three holes in it. The two on the ouside to fit the extruder fixing fastener holes of the x-carriage and the middle one for theby danielis - Mendel90
I have the same AZSMZ and reprap discount glcd. Is there a way to have the SD-card on the glcd working with AZSMZ?by danielis - Controllers
@Zavashier: I think it is the other way round. You calibrate your extruder by E Steps per mm on the input side. So the only thing yout slicer knows is how much is going in the extruder. And therefore the slicer thinks the filament ha a constant diameter.by danielis - General
The branch ist called development. So nobody can expect to get a rock stable version. There are also two releases, 1.0.1 and 1.0.2. that can be choosen and used. At least the 1.0.2 was fine for me on the Mendel90 for a very long time. Some graphical unattractiveness. But the printing was fine. It was only boredom why I start using the development branch. Not the last one sure. But some weeks beby danielis - Mendel90
It seem to me the coolingsettings are the cause for the hole. There was not enough time for the material to cool down and get hard enough to carry the next layer. I use 25s for PLA and 30s for ABS as the minimum time for one layer. That means the printer will slow down once the time per layer is so small that he would finish it faster than the limits.by danielis - Object repositories
I have used this: capacitive sensor It is working great with glass. I placed it below the steppermotor for the extruder. On the underside of the X-carriage. (I am not at home, will make pictures as soon as I am home again) For that place it is much too long. So I removed the metal housing, the outer screw itself. It is only a thin threaded tube. Opened it carefully with a Dremel on both sides aloby danielis - Mendel90