Great !! Many thank's Dust. I'll try that.by Fbmfbm - Prusa i3 and variants
thank's for the links. i have a Prusa i3 frame and i have 370mm rods with the new mk3 printed X part. With that, the X structure is 8 or 9mm longer than it should. So I must adapt the rods for find the good position. The rods in Mk3 X printed part is verry tight, so it's difficult to find the good position. this is an picture from what I'm looking to find for the dimension. with that I can redby Fbmfbm - Prusa i3 and variants
thank's Rosso for your answer, but i soon have this rods length. In my case the mk3 frame lentgh between the 2 z motors is changed from, mk2 frame version (the one i have)...so the mk3 original rods length don't work. I need to find the good one withe mk3 X axes print part on mk2 frame... that's the problème .by Fbmfbm - Prusa i3 and variants
Pour ce qui est de chauffer les tiges, j'ai imprimer les bloc en PETG et va falloir faire fort.... La troisième solution me semble effectivement plis valable. Dans un premier temps du moins, quite à utiliser une version martyr d'un des deux bloc pour évaluer la bonne position définitive.by Fbmfbm - RepRap Groupe d'Utilisateurs Francophone
Merci pour ta reponse alberdela, Je ne suis peut être pas claire désolé. Voici une image avec la dimension exacte dont j'ai besoin en rouge et en vert la simulation des tige et tige filtées pour l'axe Z. Ne connaissant pas la distance precise pour positionner les bloc imprimés de l'axe X et comme il y à apparement une difference d'entraxe entre la position des deux moteurs Z entre la version Mby Fbmfbm - RepRap Groupe d'Utilisateurs Francophone
Bonjour a tous, Je suis en train de modifier une vielle prussa i3 rework pour l'actualiser sur la base de la nouvelle version de la prussa originale la mk3. Il existe un kit pour gérer l'amélioration de l'axe Y et z ici (https://github.com/gregsaun/prusa_i3_bear_upgrade/tree/master/half_upgrade) mais pour l'axe X j'ai un problème : Je doit trouver la valeur précise de la dimension entre les deuxby Fbmfbm - RepRap Groupe d'Utilisateurs Francophone
Hi all, i have an old prussa i3 rework that i would like to upgrade to prussa mk3 from original printed part. that prussa clone as a mk2 original prusa fram like. For Z and Y axes i found working solution, but for X axe i just need real length or exact dimensions beetween the 2 printed part for adust it (For now, if i use the mk3 ref, it use 370 mm for the rods but it seam to me that's a 8 orby Fbmfbm - Prusa i3 and variants
Thank's o_lampe. I'll check that.by Fbmfbm - Laser Cutter Working Group
i all ! i have this board for driving my 2500mw laser diode, but i can't get good ttl output from it. I'm send signal fro arduino to the ttl + node (and if i test the arduino send 0 to 5 volt ok to this) but with 12v on this board in input, the outpu can only varry from 10.3v to 10.7v (0v in from arduino give : 10.3v and 5v give 10.7). Can't understand why. i waiting that output voltage varryby Fbmfbm - Laser Cutter Working Group
Hi Xclusive585, thank's for your answer. Yes i'have tested to swap the connection with the bed (it have the same type of thermistor to...) and the pin display only this value 250°. And it allway the same thing when any sensor is connected... I have tested my RAMP 1.2 with other arduino board and all is ok, the sensor display the good value. I don't have changed the type of thermistor in the firmby Fbmfbm - RAMPS Electronics
Hi all, Because my arduino mega analog pin 02 seam to be out of order, I would like to use an other analogic pin assignement for hotend temperature sensor with my RAMP 1.2 and sprinter or Marlin firmware. (the temp value for hotend are allway 250°, but the bed temp value are ok and i know that the ramp board is ok and the sensor to because i have an other arduino mega for testing it...) So i wiby Fbmfbm - RAMPS Electronics
Merci pour ta réponse deuxVis. Donc, après mesures : Les fils sont connectés deux à deux (et identifient j'immagine les bobines) Blanc avec jaune Bleu avec Rouge Orange avec vert Gris avec noir Mauve avec Marron La resistance entre chaque fils connectés est environs de 35 ohms ...by Fbmfbm - RepRap Groupe d'Utilisateurs Francophone
well.... ;( Thank's for your answer nophead.by Fbmfbm - Stepper Motors, Servo Motors, DC Motors
Hello all, I have this 10 wires steeper motor and i would like to use it for my reprap extruder. Can i use this type of steeper with pololu steeper driver ? how to connect it ?? how to find the right way to identify the wires ??? this is pictures of it : and on the motor, the only i can see is : "BERGER AHR West-germany Mb 893.003 c U.S. Patent No 3866104 P/N 100115 " please, can sby Fbmfbm - Stepper Motors, Servo Motors, DC Motors
Hello, J'ai récupéré ce moteur pas-à-pas qui me semble assez costaud (cf photo). Je voudrais l'utiliser en moteur de d'entrainement pour mon extruder/entrainement du filament sur ma reprap Eventorbot, car un couple important pour l'entrainement direct serrait bien venu (même principe que la huxley avec le moteur déporté de la tête chaude de 40 cm). Je n'arrive pas à l'identifier. Sur le corby Fbmfbm - RepRap Groupe d'Utilisateurs Francophone
Je vais tester avec la soude à 50% pour voire.by Fbmfbm - RepRap Groupe d'Utilisateurs Francophone
Hello, Afin de monter une alternative de mon extruder, j.aimerai récupérer une vieille buses en laiton et un tube en tephlon complètement encrassés et bouchés par du pla cuit. Ma question est donc : quel est la meilleur solution pour cela ? Existe t-il un moyen plus efficace que le chauffage ( pas très pratique dans mon cas) ...trempage dans un bain pour dissolution ? Merci pour votre aide.by Fbmfbm - RepRap Groupe d'Utilisateurs Francophone
Bon finalement, pour ceux que cela pourrai intéresser: j'ai trouvé chez weber à Paris, du carré en 60 de coté en acier, vendu en 2m. Ca devrai le faire....en version costaud !by Fbmfbm - RepRap Groupe d'Utilisateurs Francophone
Malheureusement, 50mm c'est trop peu....minimum 60 de coté Mais avec le bon vocabulaire ("care alu"), j'ai l'impression que mes recherches google sont plus fructueuses. Merci tchichouby Fbmfbm - RepRap Groupe d'Utilisateurs Francophone
Hello, Après avoir monté et utilisé une mendel depuis quelque temps, je suis séduit par le concept de cette version disponible en open source sur le site reprap : eventorbot Cette version me semble apporter beaucoup d'améliorations et surtout une très grande simplicité dans la mécanique, ce qui pourrai à mon avis combler les lacunes de ma fidèle Mandel (trop de vibrations et donc du jeu qui aby Fbmfbm - RepRap Groupe d'Utilisateurs Francophone
Hello ! Merci pour les liens. Effectivement, les quantités minimums imposent éventuellement une commande groupée. Pourquoi-pas ? je pense qu'il est suffisamment complexe de trouver en France les éléments pour réaliser les parties chaudes de la reprap pour que l'on y réfléchisse. Mais dans un premier temps j'ai trouvé un peu de téflon sur ebay, je vais tester avant pour voir si cela est réalisaby Fbmfbm - RepRap Groupe d'Utilisateurs Francophone
Bonjour à tous, Je viens de terminer l'assemblage d'une reprap prussa couplée avec une RAMPS 1.2 et l'ensemble des axes et maintenant calibrés. Tout fonctionne, si ce n'est que je n'arrive pas à me procurer de hotend pour adapter sur ma Prussa. J'ai bien passé une commande sur MendelPart il y'a plus de trois semaines, mais rien n'arrive et l'absence de communication avec ce vendeur n'est pas deby Fbmfbm - RepRap Groupe d'Utilisateurs Francophone