I am stuck. I thought I could just use Marlin firmware to control the custom 3d printed laser cutter. I had seen some fellas use one of those chinese laser cutters and converted it with ramps 1.4. I was thinking I could just adjust the settings and use the fan D10 connection to control the laser diode I have. Anyone out there convert a ramps 1.4 w/ 2560 mega into a diode laser cutter? Would loveby Humpster - Laser Cutter Working Group
So once upon a time I got this idea in my head I was going to make a laser cutter. I had seen this and I thought I could use that firmware with a few adjustments on a chasis of my own making. So I have the chasis made and the firmware installed however i can't seem to get the motors to move. I have poured over the configuration.h and I have unremmed the #define DISABLE_MAX_ENDSTOPS and #defineby Humpster - RAMPS Electronics
I too am gettign the skipping of the motor. I have taken it all apart and cleaned the hot end. I have reconnected all the wiring to make sure all contacts are good. It seems it skips when there is high demand, like when it is filling.by Humpster - Mendel90
What is the procedure for updating configuration.h?by Humpster - Mendel90