@k3vbot3000 Good news.by SergioMC - Developers
Try changing #define MOTHERBOARD BOARD_RAMPS_13_EEB // RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed) to #define MOTHERBOARD BOARD_RAMPS_13_EEBby SergioMC - Developers
Maybe // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. // #define EXTRUDER_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis // #define EXTRUDERby SergioMC - Developers
Are u sure this is your configuration.h file? Number of extruder is set to 1- In Marlin 1.0.2 i use, board selection is different than in 1.0.1. See board.h Please post the code in next message.by SergioMC - Developers
Seems u are using Marlin 1.0.1 try to update to 1.0.2.by SergioMC - Developers
Hola Alberto seguramente el problema lo tengas en las poleas que tienes en los motores. ¿has aplanado el eje de los motores? Una vez aplanado asegurate de apretar sobre esa zona el tornillo de la polea. En cuanto al sonido cuando haces homming, ¿te ocurre si mueves los ejes con la mano? Si el sonido es en z prueba a bajar la aceleracion y z-jerk de dicho eje en tu Marlin. (configuration.h) Prusaby SergioMC - RepRap en Español
Maybe MENU_ITEM(gcode, "unload filament", PSTR("your gcode for extract filament")); MENU_ITEM(gcode, "load filament", PSTR("your gcode for load filament ")); This is not tested so be careful. Keep your finger on power button while testing changes.by SergioMC - Firmware - mainstream and related support
Hi I am working with dual extrusion set-up. I found from LCD you can't change active extruder, so I mod Marlin to allow manual extrusion (E0 or E1) from LCD. Dual Extrusion. Marlin 1.0.2 Modification for change active extruder from LCD. It`s very simple. Open Marlin on Arduino IDE. Search UltraLCD.h Add this two lines: MENU_ITEM(gcode, "Activar E0", PSTR("T0")); MENU_ITEM(gcode, "Activar E1", Pby SergioMC - Firmware - mainstream and related support
Efectivamente es la velocidad del ventilador de capa (salida D9 en la ramps) es una salida PWM lo que permite un rango de valores de 0 a 255. (0=0% 255=100%). Esta salida la gestionas mediante un Gcode (M106 0-255.by SergioMC - RepRap en Español
Is bed as flat as posible? Do u use glass as bed surface?by SergioMC - Delta Machines
Do u want to avoid touching building plate support? I don't know if it's posible in slic3r maybe in cura.by SergioMC - Slic3r
27 amperios en la linea de 12 voltios esta bien, pero hay que ver si en realidad llega.by SergioMC - RepRap en Español
You can use modifiers in Slic3r to modify the parameters in these zone.by SergioMC - Slic3r
I use true color 32 bits. Ok I post the log next time it happen.by SergioMC - Repetier
If i understand u it´s "Fantastic". Seems you solved it, but mey u want to take a look Misan work in Sorry if not. I´m not english.by SergioMC - Firmware - experimental, borrowed, and future
I use an ATI HD 5770 1024mb 8gb ram quadcore. win7 x64. Please, Where is log file located?by SergioMC - Repetier
Same problem here. I was printing and out of video message apears. No idea what happen. SMCby SergioMC - Repetier
Maybe this can help u.by SergioMC - RAMPS Electronics
Que son como deben ser. todo lo que no este en el diseño de blender sera tratado como espacio a rellenar por el software de fileteado.by SergioMC - RepRap en Español
If u have a image of the pattern you can do it. from image to paths , paths to 3dobjet and then Slicer and modifier meshes. With modifier meshes you can "split" your model and modify some parameters of different parts. I do this from a image. Sorry for my English.by SergioMC - General
Yes, with your second object selected, click "move object button" in the right panel and then you can place your x,y,z coordinate´s model. Fisrtable you can see the another model´s Zmax in the object properties panel, to place correctly the origin of your second model. Sorry for my bad English.by SergioMC - Slic3r
What resolution the photos are? You need good resolution if u need details, and your model seems very "intrincated". If you want to i can try with some photogrammetry solutions with +70 images. Can you upload this somewhere?by SergioMC - 3D Scanners, Book Scanners, and Optics
Iˋm working same but different way. My goal is doing a prusa i3 with standar configuration (no firmware modification) to draw from a jpg file. This is the first success atemp. Drawing with reprap Sorry for my bad English. Bye.by SergioMC - Developers
It's seems to be the Arduino's voltage regulator. Are you powering your Arduino through Ramps (D1 diode). This power is limited to 12 volts, if more you can fry voltage regulator. A heatsink, maybe help, bit it is not the solution. Sorry for my english.by SergioMC - Printing