Show all posts by user
http://reprap.org/wiki/Laser_Cutter
Arduino Uno + CNC shield - 4 years ago
Hi everyone, I a having problems with the Y axis on my CNC. I am using LaserGRBL and the manual jog control works but once the cutting starts the y axis does not move anymore, any sugestion? Thans in advanced.by alfombra - Laser Cutter Working Group
Re: Ender 3 pro - 4 years ago
Sorry for not updating be4, researching a lot over the internet it seem that there are some Creality 1.1.5 boards that came out with some firmware issues with Simplify 3D soft, there one i am using. There are two possible solutions, one updating the board with Arduino bootloader or changing the slicer soft, for now i am testing a liitle bit with Cura but i will possibly update the board to use siby alfombra - Reprappers
Re: Ender 3 pro - 4 years ago
Hi everyone, i adjusted the Vref to what crealitz recomends and for now is going fine, thanks!!!by alfombra - Reprappers
Re: Ender 3 pro - 4 years ago
Which adjustment do you think is better Vref or current? With which value? I already checked if the stepper gear gets stuck with something, but nothing at all.by alfombra - Reprappers
Ender 3 pro - 4 years ago
Good morning all of you, Here again with abother issue hoping to get resolved with your help if possible. This issue is with the Ender 3 pro printer, the E motor stops randomly. Its not a cloging problem as i can manually push the filament through hole after printing stops. I already changer the default fan with a bigger one and lifted the printer from bottom surface to make the fan blow moreby alfombra - Reprappers
Re: Flsun 3d Cube clogged extruder - 4 years ago
Thanks for the answer, i changed te serial port 2 to Serial port 0 and now it seems to work testing one motor. Going to test the rest. Than you.by alfombra - Reprappers
Re: Flsun 3d Cube clogged extruder - 4 years ago
Morning, i solved the clogged extruder problem, thanks for the ideas . But i have another issue now, im running SKR V1.1 with an MKS TFT3.2 inches display and this one is not communicating with the board, any ideas why? Thanks in advanced.by alfombra - Reprappers
Re: Flsun 3d Cube clogged extruder - 4 years ago
I started with the usual temp, around 210 degrees, then changed to 195, 200, 205, 220, 230, and nothing. I have a multimeter with a temp sensor and the temp is pretty much the same.by alfombra - Reprappers
Re: Flsun 3d Cube clogged extruder - 4 years ago
I changed the filament already, PLA all the time, same problem.by alfombra - Reprappers
Flsun 3d Cube clogged extruder - 4 years ago
Good evening all of you, i have a problem with the flsun 3d cube printer, the hotend gets stucked in every print, i tried to rise and lower the temp, i modified the retractions, i changed the entire extruder (currently with e3d v5) changed the motor driver checked the cooling fan, i cheked the steps per mm matches the real ones but nothing of this helped out and i am getting pretty desperate so fby alfombra - Reprappers
Problem axis prusa i3 - 8 years ago
hello i just introduced my self and hope you can resolve my problem. the thing is that i assembled a prusa i3 by myself and the problem comes with the movement of the axis. I use the pronterface to test the movement but every time i send a command to move any axe the motor move a couple of times where i want but then it stops and makes strange noises and after a couple of seconds i can move themby alfombra - Cleveland Ohio - RepRap Usergroup
Re: Si llegas a este foro pásate por aquí - 8 years ago
hola a todos desde alicante, españa!!!by alfombra - RepRap User Group España
Problema movimiento ejes - 8 years ago
Buenas tengo unos problemas que espero me puedan resolver aqui, el caso es que estoy montando una impresora prusa i3 ya esta practicamente terminada salvo por que no se mueve debidamente. El problema es el siguiente, cada vez que utilizo el pronterface para mover los ejes, los puedo mover correctamente un par de veces hasta que se paran los motores, hacen unos sonidos raros y se vuelve a mover yby alfombra - RepRap User Group España