Hello ! I am asking for help in solving the problem with my Corexy BTT SKR 2 rev B printer In the attachment my configuration files. description of the problem: The exstruder motor works from the LCD panel (M302 P1) without a nozzle from the Repetier -Host, you can easily calibrate stp / mm. Everything seems to be working properly. The problem appears when the printed extruder oscillates, doesby qulet - Firmware - Marlin
w załaczniku moje pliki configuracyjne. opis problemu: Silnik exstrudera działa z panelu LCD (M302 P1) bez dyszy z Repetier -Host można bez problemu z kalibrować stp/mm. Wydaje się że wszystko działa właściwie. Problem pojawia się podczas zapuszczenia drukowana ekstruder oscyluje nie podaje filamentu. film: bazowanie film: To jest moja druga drukarka DIY COREXY. Pierwsz kartezjańska(by qulet - Firmware - Marlin
In Smoothieware, you can read and write data to the SD MKS SBASE card via a connected USB cable to the PC. How can this be done in Marlin 2.0?by qulet - Firmware - Marlin
Subsequent modifications to the configuration SD card in RRDSC worked. Thank you very much for the tips given. I would like to start Autoleveling with the sensor from this link: Which PIN_y should the servo be connected to? Do I need to power a 5V servo from an additional source? I wish you good health . Greetingsby qulet - Firmware - Marlin
61/5000 Thank you for your answer. I have improved the SDCARD_CONNECTION CUSTOM_CABLE, unfortunately it does not work ... I have attached my configuration files. Greetings!by qulet - Firmware - Marlin
I have problem with Marlin 2.0 MKS Sbase V1.3 + RRDSC 12064. The LCD menu works, the SD card does not work. SD cable is: P0.8 to J8-3 P0.7 to J8-2 P0.9 to J8-4 (P0.5 to J8 -4) P0.27 to J8-5 What should I do to make the SD card work ????by qulet - Firmware - Marlin
Thank you, I am interested in controlling the TTL laser power with dir and step signals via arduino. I am looking for a working scheme and charge to the microprocessor. Unfortunately, I can not program the microprocessor myself.by qulet - Laser Cutter Working Group
Can you share the arduino batch and connection scheme?by qulet - Laser Cutter Working Group
VICTOR! you can whether you can share the code for arduino and the diagram for converting STEP to TTL. i Say how the NC code for "greyscale" is practically generatedby qulet - Laser Cutter Working Group
VICTOR! can you develop the topic of TTL laser power control using STEP extruder? How does it look like?by qulet - Laser Cutter Working Group