mks gen 1.4 new board The moment I connect my board to the computer, the board or TFT gives a few beeps and says " settings retrieved " It does show up as com8 but there is no communication between the two. and am using VCS which compiles fine but times out when trying to upload Pronterface says connected but the board ignores any gcode. The only non stock item is the BTT TFT35 V3 which worby Mike_Amick - General
Just to finish the thread with what happened, I have a small home machine shop. I elongated the holes and put spacers in. The one I did for the X carriage came out nice, but the ones I did for the bed carriage I messed up and actually made it worse. So, am awaiting the aluminum bed support from ebay. Mikeby Mike_Amick - Mechanics
That video was the cat's meow ... Thanks for the help everyone. Mikeby Mike_Amick - Mechanics
Assembling my first printer, a Tevo Tarantula. The rolling assemblies have these wheels with eccentric nuts that you turn to move the wheels in and out to adjust closeness to the extrusions. A few of mine don't seem to get close enough (snug enough) and I can actually take the moving assembly and wiggle it a bit. Is there any wiggle allowed .. or should it be pretty wiggle free, and if tby Mike_Amick - Mechanics