Show all posts by user
Page 1 of 1 Pages: 1
Results 1 — 10 of 10
Hi, im currently converting a K40 cutter. I wanted to use the Ramps 1.4 i have but im not sure what firmware to use. If possible it would be great if i could use the reprapdiscount full graphic smart controller. I had a look at grbl but it seems it needs some specific board on top. At the other hand Marlin seems to be focused on printing. Im not sure how to control it after that. Seems there is a
by
o5i
-
Laser Cutter Working Group
Hi, i have almost finished my Ultimaker clone. Im not shure if the XYZ axis going the right way.
If Z is zero, the lifting bed is on the top or on the bottom of the router, i assume Z=0 menans zero height of the model so it should be at the level of the nozle and Z+ in this sense should move the bed down... is that true? so the min Z endstop switch is at the nozle.
What about XY what are the dire
by
o5i
-
Mechanics
i have a utimaker clone whit triple z axis and z probe.. what i want is adjust the bed to be flat automaticly by measuring the distance on 3 points of the bed (where the steppers are) its like a triangle... i saw that it is possible but what firmware is the best to use in this case?
by
o5i
-
Mechanics
Hi, i figured out that there are some printers who do auto calibration at the start.. Do you have some idea wich firmware they run?
by
o5i
-
Mechanics
Hallo
Bin neu hier! Also erstmal Hallo!
Weil ich ab und zu so Zeugs wie Gehäuse Halter usw brauche dachte ich mir ich bau mir mit nem Kumpel nen 3D Printer.
Dann ham wir ein wenig rescherschiert und sind zum schluss gekommen dass es ein Ultimaker klon werden soll, auch deshalb weil wir kostenlosen Zugang zu einem grossen Lasercutter (1500x1000) haben.
Nun sind wir in der Planungsphase, wobei di
by
o5i
-
Projekte
Hi i am buildn a ultimaker clone, but bigger...
Because of the bigger size i wanted to use 3 steppers on the z axis to avoid problems..
I thought if i use the 3 steppers it should be possible to auto calibrate the z axis using a proximity sensor..
I saw there is a options called auto leveling..
The controller i want to use is a ramps 1.4 whit triple stepper expander..
Someone did this or can g
by
o5i
-
Mechanics