Show all posts by user
Page 1 of 1 Pages: 1
Results 1 — 6 of 6
The program does not respond to the signal of Z-probe
by
chivel
-
Tech-Talk
Dear Sirs
Please explain to me why in the Status section for the Delta printer at the HOME point, the head position X and Y coordinates are 0 and Z is 999. In DELTA all coordinates are equai.
May be problem in Firmware version?
by
chivel
-
Reprappers
Dear DC42 . H parameter in M665 is the level of Z-probe , not Z coordinate in DElta printer. In Delta X,Y,Z -in home must be 0.X,Y,Z coordinate are equal in DELTA. Maybe the firmware must be change?
DC42. In config.g I set in M666 X=0 Y=0 Z=0. Why Z = 999?
by
chivel
-
Developers
H parameter in M665 is the level of Z-probe , not Z coordinate in DElta printer. In Delta X,Y,Z -in home must be 0.
DC42. In config.g I set in M666 X=0 Y=0 Z=0. Why Z = 999?
by
chivel
-
Firmware - mainstream and related support
Dear Sirs
Please explain to me why in the Status section for the Delta printer at the HOME point, the head position X and Y coordinates are 0 and Z is 999.
May be problem in Firmware version?
by
chivel
-
Firmware - mainstream and related support