Show all posts by user
Page 5 of 5
Pages: 12345
Results 121 — 129 of 129
I tried using Version 0.8.3, it's ok.
Here my config.ini:
acceleration = 0
bed_size = 200,200
bed_temperature = 0
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 40
complete_objects = 0
cooling = 1
disable_fan_first_layers = 0
duplicate = 1
duplicate_distance = 6
duplicate_grid = 1,1
end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors
extruder
by
flurin
-
Slic3r
@nophead
You are right, here is the preceding Code:
G1 X89.036 Y92.749 E10.53285
G1 F1800.000 E9.53285
G92 E0
G1 X54.827 Y112.327 F12000.000
G1 F1800.000 E1.00000
9.53285 - 10-53285 = -1.0 retraction
by
flurin
-
Slic3r
OK! I got it, it depends on the setting "Use relative E distances"
with "use_relative_e_distances = 1" the Gcode is:
G1 F1800.000 E-1.00000
G1 X54.827 Y112.327 F12000.000
by
flurin
-
Slic3r
Examinating the Gcode for the retraction option (1 mm) I've found following code:
G92 E0
G1 X54.827 Y112.327 F12000.000
G1 F1800.000 E1.00000
However I expected E-1.0000 (negative) after G92 E0, something like this:
G92 E0
G1 X54.827 Y112.327 F12000.000
G1 F1800.000 E-1.00000
What am I missing?
by
flurin
-
Slic3r
@Sublime
As far as I know the filament diameter and the Extrusion multiplier are used to calculate the plastic volume. Some people use the extrusion multiplier to correct the volume. But the reason is the diameter, therfore I usually measure the filament diameter several time and set the value e.g. 1.7 instead of 1.75 and don't change the extrusion multiplier.
by
flurin
-
Slic3r
No, it doesn't change. I'll report this "bug" in the github project.
by
flurin
-
Slic3r
I printed your perimeter-wt-stl (perimeterwt_fixed.stl) three times. Here are the print results:
a) Pronterface + Slic3r V.0.8.4
block = 10.4 mm, slot = 9.3 mm
b) Pronterface + Slic3r V0.8.3
block = 10.3 mm, slot = 9.4 mm
c) Pronterface + Skeinforge
block = 10.3 mm, slot = 9.4 mm
by
flurin
-
Slic3r
The new Version 0.8.4 doesn't randomize the starting points. 0.8.3 is ok.
Has anybody encountered this "bug" too?
by
flurin
-
Slic3r
Hi dzach
First I'd like to thank you for your efforts.
Here is my test result using Marlin 1.0.0 RC2.
The other parameters are:
Extruder: MakerGear Stepper Plastruder
Slicer Software: Slic3r, Version 0.8.4
Filament: PLA
Nozzle : 0.35
Temperature [°C]: 195 (185)
Layer height : 0.25
Print Speed (all settings, Perimeters .. Travel) : 150
First Layer speed : 75
Accelaretion : 3000
by
flurin
-
General
Page 5 of 5
Pages: 12345