Show all posts by user
Page 1 of 1 Pages: 1
Results 1 — 2 of 2
Some updates:
Probe: BLTouch
I am now performing Assisted Bed Levelling thru Gcode as follows:
1) position the BLTouch in one of the corners of the bed
2) send Gcode
G1 Z0
3) Calibrate the height of the bed, e.g. using the paper/visit card method (actually I am using a 0.1mm gap measurement blade)
4) send Gcode
G30 S-1
5) Read the echo from printer, e.g. Bed X: 50.00 Y: 29.00 Z: 0.10, and pay
by
Nexus
-
Firmware - experimental, borrowed, and future
I would like to know how convenient would be to have Marlin firmware assisting on the bed levelling operation.
The idea is to combine the traditional method (piece of paper or feeler gauge) with the levelling sensor, e.g. 3DTouch.
The procedure would be something like:
1) Setup the desired distance between the bed and the nozzle using the traditional method (paper or feeler gauge)
2) Go to the
by
Nexus
-
Firmware - experimental, borrowed, and future