Show all posts by user
Page 1 of 2
Pages: 12
Results 1 — 30 of 32
Thanks for your patience. And also for your help.
As I Said I am looking for a way to have access to the wifi Interface and a full lcd functions. Using the 12864 and the wifi server in a similar way that duet wifi does
by
DrDitto
-
Firmware - experimental, borrowed, and future
Hi good afternoon from Costa Rica
I am reviewind the code of RRF LPC port
And I need to ask something.
I saw that the esp8266 WIFI uses SPI related with extarnalsdcard.
I tehre any way to remap tyhe spi channels to have SPI0 for the lcd and spi1 for the WIFI? This could allow us to have both at he same time.
At the same tie I sae P0.5, P4.28 and P0.4 (MISO,MOSI,SCK)
Could those pins allow me to h
by
DrDitto
-
Firmware - experimental, borrowed, and future
Thanks to all.
I will make a deep research.
At the moment I will work changing the new Open source mks tft firmware. Because the one that all mention at the messages did not work. It shows no images for the button.
by
DrDitto
-
Firmware - experimental, borrowed, and future
No mine is the one made from maker base or btt so it was designed to be used using aux 1 or uart. I would like to have the chance to have a lcd and a wireless function together
by
DrDitto
-
Firmware - experimental, borrowed, and future
Thanks.
I will Build the esp12s programmer and uploadc DuteWifiServer.bin using the espressif/esptool latest repo
But let me ask a question
May I use the aux1 port directly?
Or must I use mks tft35?
by
DrDitto
-
Firmware - experimental, borrowed, and future
I use mkstft35 boot loader inorder to upload DuetWiFiServer.bin to esp12s
I am Actually ruining the ESP12s over aux1 port.
Is there any advice in order to enable the module.
I rebuild the firmware using ESP8266WIFI ?= true
by
DrDitto
-
Firmware - experimental, borrowed, and future
This is my M122 P200
SENDING:M122 P200
== Configurable Board.txt Settings ==
lpc.board = biquskr_1.3
leds.diagnostic = NoPin
stepper.enablePins = { 2.1 2.8 0.21 2.12 0.10 }
stepper.stepPins = { 2.2 0.19 0.22 2.13 0.1 }
stepper.directionPins = { 2.6 0.20 2.11 0.11 0.0 }
stepper.digipotFactor = 0.00
stepper.TmcUartPins = { 1.17 1.15 1.10 1.8 1.1 }
stepper.numSmartDrivers = 5
heat.tempSensePins = {
by
DrDitto
-
Firmware - experimental, borrowed, and future
oK
I Recompile all with no network
This is the new M122
and all data but LCD Shows nothing
--
LCD works in marlin as a RRD Full Graphic LCD
but not in my setup
----
SENDING:M122
=== Diagnostics ===
RepRapFirmware for LPC176x based Boards (biquskr_1.3) version 3.01-RC12+ running on LPC176x at 100Mhz
Used output buffers: 1 of 16 (1 max)
=== RTOS ===
Static ram: 3496
Dynamic Memory (RTOS Heap 5):
by
DrDitto
-
Firmware - experimental, borrowed, and future
I have 2 lcds
I rotate the 1rst one bur with ratated it dows not work
the other with stcok connectors al least the shows the backligth on
---Have to rotatet the connectors 180° ? I have to do it in my skr Board with full Rep Display. You have to Cut away the notch on the cables.
by
DrDitto
-
Firmware - experimental, borrowed, and future
This is my M122 output
>>> M122
SENDING:M122
=== Diagnostics ===
RepRapFirmware for LPC176x based Boards (biquskr_1.3) version 3.01-RC12+ running on LPC176x at 100Mhz
Used output buffers: 1 of 16 (8 max)
=== RTOS ===
Static ram: 3496
Dynamic Memory (RTOS Heap 5): 12960 free, 12936 never used
Exception stack ram used: 264
Never used ram: 420
Tasks: HEAT(blocked,1372) MAIN(running,1448) I
by
DrDitto
-
Firmware - experimental, borrowed, and future
This is my config
; Configuration file for SKR v1.3 (firmware version 3)
; executed by the firmware on start-up
;
; generated by RepRapFirmware Configuration Tool v2.1.4 on Mon May 11 2020 04:54:50 GMT-0600 (hora estándar central)
; General preferences
G90 ; send absolute coordinates...
M83 ; ...but relative
by
DrDitto
-
Firmware - experimental, borrowed, and future
#Enable when debugging on MBED to swap serial and USB
#and select direct ld script
#MBED = true
BUILD_DIR ?= ./build
FREERTOS_DIR ?= ./FreeRTOS
REPRAPFIRMWARE_DIR ?= ./RepRapFirmware
RRFLIBRARIES_DIR ?= ./RRFLibraries
CORELPC_DIR ?= ./CoreLPC2
#BUILD ?= Debug
BUILD ?= Release
#Enable only one
#NETWORKING ?= true
#ESP8266WIFI ?= true
#SBC ?= true
TMC22XX ?= true
by
DrDitto
-
Firmware - experimental, borrowed, and future
Thanks for the help
I get this error
RepRapFirmware/src/GCodes/GCodeBuffer/StringParser.cpp: In member function 'int32_t
StringParser::ReadIValue()':
RepRapFirmware/src/GCodes/GCodeBuffer/StringParser.cpp:1634:23: error: 'SafeStrtol'
was not declared in this scope
const int32_t rslt = SafeStrtol(gb.buffer + readPointer, &endptr);
^~~~~~~~~~
RepRapFirmware/src/GCode
by
DrDitto
-
Firmware - experimental, borrowed, and future
I folow all the steps at this link
But When do Terminal*/Run Task Build firmware
This comes out
> Executing task in folder CoreLPC4RRF: make all <
- Firmware Filename: firmware.bin
- Linker Script used: ./CoreLPC2/variants/LPC/linker_scripts/gcc/LPC17xx_smoothie_combined.ld
- Building ESP8266 WIFI Support
- Building LPC TMC22XX support
""
La sintaxis del comando no es correcta.
bin\mak
by
DrDitto
-
Firmware - experimental, borrowed, and future
> Executing task in folder CoreLPC4RRF: make all <
- Firmware Filename: firmware.bin
- Linker Script used: ./CoreLPC2/variants/LPC/linker_scripts/gcc/LPC17xx_smoothie_combined.ld
- Building ESP8266 WIFI Support
- Building LPC TMC22XX support
""
La sintaxis del comando no es correcta.
bin\make.exe: *** Error 1
The terminal process terminated with exit code: 1
Terminal will be reused by t
by
DrDitto
-
Firmware - experimental, borrowed, and future
Page 1 of 2
Pages: 12