Show all posts by user
Page 1 of 1 Pages: 1
Results 1 — 17 of 17
That took care of it
Quotesdavi
Quotecyris69
Thanks, I haven't downloaded any source to build from. I'm sure sdavi will see this.
I've updated to the latest strtod and uploaded new binaries. I haven't included the new grid.cpp as it wasn't a straight drop in, so hopefully the new strtod fixes it for now - grid loads ok for me here.
by
cyris69
-
Firmware - experimental, borrowed, and future
Hey dc42, might I ask for your help understanding what's going on with loading mesh grid? It seems that you need to call the heightmap in order for it to get used. So I place G29 S1 in my start script after G28. However, I get this error.
Error: G29: Failed to load height map from file heightmap.csv: number expected at line 3 column 1
This is the height map as well:
by
cyris69
-
Firmware - experimental, borrowed, and future
As much shit as you sometimes get dc42 it's nice to see you still try and help out documenting and providing resources to those trying to port RRF for other boards. So just wanting to say thanks.
by
cyris69
-
Firmware - experimental, borrowed, and future
The probe is working and z is moving in correct direction. So the probe will always go back to 5 no matter what until it prints then uses the value you've set?
Also should I be uploading the .g macro files to octoprint and not using the homing buttons or terminal for those functions? Wish octo had a macro plugin
I'll see if I can run a print on a cold bed since that isn't working yet and see wh
by
cyris69
-
Firmware - experimental, borrowed, and future
Got motors going correct way, can extrude and its pushing the right way. Part fan doesn't do anything but maybe thats the firmware. I just used second hotend terminals like I found to do online so maybe need to adjust that somehow. Alos, when setting the z offset, if I do a home for Z it just goes down 5 then back up even though I tested at Z5 offset.
Also seeing if it was because I wasn't using
by
cyris69
-
Firmware - experimental, borrowed, and future
Apparently My hot end has been at 200C for like 18 hours without me knowing... however the M105 reports the correct room temp for the bed.
This is how I have my ramps wired, haven't noticed any new lights flashing and on my mosfet board for controlling the bed has an LED that will blink light when its sending power to bed. If you look at the LED closets to the group of mosfets the LED labeled LE
by
cyris69
-
Firmware - experimental, borrowed, and future
Ok good to know, I reset the machine and assumed it would keep settings but it didnt so I'll mess with that again. I'll look at your config about the tool selection..
Have any idea why hotend is working but bed isn't being triggered? It is controlled by a mosfet board which is wired into the board like you'd normally do if direct. Worked on marlin/smoothie but haven't gotten down to reading more
by
cyris69
-
Firmware - experimental, borrowed, and future
If this helps at all, this is my working marlin 2.0 config.
EDIT: I got it going messing with gcode via terminal. Just need to make sure extruder is proper first. That and it's not turning on my bed.
EDIT #2:
Recv: Error: Attempting to extrude with no tool selected.
Changing monitoring state from 'Operational' to 'Error: Attempting to extrude with no tool selected.
by
cyris69
-
Firmware - experimental, borrowed, and future
Ok, that line of code worked in terminal and all motors moved to home, just my x/z axis thinks min is to the right when it should be left/down. How do I save it to memory, does M500 work with RRF? Also anyway to set z to home to XY 150+offset before probing?
Send: M119
Recv: Endstops - X: at min stop, Y: at min stop, Z: not stopped, Z probe: at min stop
Recv: ok
EDIT:
SO my probe has an x offs
by
cyris69
-
Firmware - experimental, borrowed, and future
I was able to get xy to trigger they are your run of the mill reprap endstops. Your re-arm pins are correct I went through your code.
Can't get probe though, here is all the output. Also in the rrf tool I picked the unmodulated or smart ir probe since it was default and not sure which for capacitive NPN NO probe. Also seems motors aren't activating using the values taken from your config. Sorry,
by
cyris69
-
Firmware - experimental, borrowed, and future
I reran it as marlin and connected fine but running M119 but getting
Send: M119
Recv: Endstops - X: not stopped, Y: not stopped, Z: not stopped, Z probe: not stopped
Seems my stops are on the axis min just need to move them to max, then in the configuration tool set their end stop locations to 'at high end' and leave z to "at low end". Still faster than I got smoothie to even do anything lol
by
cyris69
-
Firmware - experimental, borrowed, and future
Ok, I tried RRF configurator but no serial access. I'll give yours a go and see how she chooches as I run a e3d as well.
Sucks to think it might not get RRF's web interface and functionality such as live editing which to me is a huge perk. I will be going duet ethernet on my rostock max v3 once I can afford it new by the end of the year I hope or find a sale/used one once duet2 comes out.
Marli
by
cyris69
-
Firmware - experimental, borrowed, and future
I've got a CR-10 running a RE-ARM + Ramps 1.4 SB Premium. and willing to be a guinea pig if you'd like. I'm running marlin 2.0 right now and it's good but also been interested in RRF and their webgui if this supports the re-arm ethernet module. Besides just flashing, I assume I do the RRF online config to create the .g files?
by
cyris69
-
Firmware - experimental, borrowed, and future