Show all posts by user
Page 1 of 1 Pages: 1
Results 1 — 6 of 6
fix my issues. seems config.g was not being read at all. also reinstalled the board.txt file which fixed the problem with the wrong board being used.
notice the lack of a missing ; on the three lines which caused config.g to quit immediately and therefore nothing was being configured.
Thanks for the headsup on the board jay_s.
; Configuration file for factory testing Duet Ethernet and Wifi wi
by
cd_edwards
-
Firmware - experimental, borrowed, and future
Quotejay_s
@cd_edwards
Try moving your M552 command to the end of your config file.
Moved it to the very end and still the same..
T0
M552 P192.168.1.18 S1 ; IP address
by
cd_edwards
-
Firmware - experimental, borrowed, and future
Just started fooling around with a MKS Sbase board and RRF. I found that the M552 P192.168.1.18 S1 which I have in my config.g is ignored and I need to send this with a USB serial connection in order to have networking work. This is with gloomyandy's RC9 RRF version and DWC 2.1.3. FYI connection is a wired connection not wifi. Once I send the appropriate M552 command, everything works.
by
cd_edwards
-
Firmware - experimental, borrowed, and future