Show all posts by user
Rasanya tidak 100%. Saya pernah posting link ini untuk menghitung bea impor, dari pengalan akurat:
Bea tegantung harga dan tergantung deklarasi dari si penjual. Jika ukuran kecil dan dideklarasikan murah bisa aja ga diperiksa. Tapi jika ukuran besar pasti diperiksa.
Untuk kurir2 itu yg ngebedain biaya handlingnya.
by
zungmann
-
Indonesia RepRap User Group
Plastik Part itu komponen unik yg bisa menyatukan si rangka, jadi dudukan motor atau jadi extruder dan gearsnya untuk mengeluarkan filamen. Unik karena ga tersedia secara umum, mau ga mau harus dibuat/dicetak.
by
zungmann
-
Indonesia RepRap User Group
Congrat Jand. Its beautiful. Given it printed in white which expose the inconsistent layers more than other colors, yours look very good.
So now its ok to print your parts then...
On the Mendel though, which variant of printed parts you are using, particularly interested in the X-End
by
zungmann
-
CoreXY Machines
Ayo bro lanjutkan saja dan share di sini pengalamannya. Angka segitu masuk akal, jangan lupa itung dan buffet buat bea masuk dan pajak ya.
by
zungmann
-
Indonesia RepRap User Group
Hi All, been off quite a while. I ran into several different issues. The X back cable getting loose so its harder to move along X direction. I tried to push it by running more current but then the motor shaft slipping. Z axis also seems still have a lot of wobble after earlier fix to make the Z lift have some play. So I decided to dissemble the things and make all more proper
Started with disab
by
zungmann
-
Tantillus
Bro Dewa, Marlin sudah support CoreXY, saya lihat ada konfigurasinya. Tapi belum perbah coba. Untuk Teacup saya tidak melihatnya. Saya kira bisa dibisakan , nanti saya lihat ya seberapa feasible Teacup untuk CoreXY. Saya pun rencananya mau bikin printer dengan CoreXY.
by
zungmann
-
Indonesia RepRap User Group
Angkat topi buat bro Ganz (maaf, adanya ikon angkat jempol aja )
Bisa merancang dan membuat sendiri printernya, dan it works ! Sebuah langkah awal yang sangat bagus, dan RepRap sekali semangatnya. membuat RepStrap dan sudah bisa print partya sendiri. Saya yakin jika diterusakan printernya bisa berevolusi dan melahirkan printer 3d lain yang lebih baik dan lebih baik lagi.
Beberapa hal yang mebar
by
zungmann
-
Indonesia RepRap User Group
Ah senangnya ada update dari bro dewa, Alhamdulillah ade bayinya sudah sehat kembali dan bisa melanjutkan proyeknya.
Memang CoreXY adalah 'alternatif' yang lebih baik, mengatasi problem yang ada di HBot. Menarik juga dengar cerita pembuatan framenya. Bro dewa memang pandai bercerita juga rupanya. Ditambah foto-foto akan lebih menarik lagi
Bro dewa mungkin bisa share biaya pembuatan frame ini,
by
zungmann
-
Indonesia RepRap User Group
Other calibration prints.
Print 4
Set travel speed to 130 mm/s. I got two XY layer shifts, a bigger one at below. I turned up the XY pot drivers a bit more and made the heatshink very hot
Print 5
Lower the travel speed to 125 mm/s and add fan to the controller. This time looks good. Then I tempted to print the Frog. Overall looks OK other than two layer shifts: the bigger one on X at below and
by
zungmann
-
Tantillus
When the printer started to print sparsely, did you try to manually turn the extruder? Was it easy too? Well, if you have tightened enough the idler then something blocking the filament along the way to the nozzle or within the nozzle itself, unless your hobbled is not good hence slipping.
I had similar issue with my Prusa, what I did just increase the temp to 215 - 220, it temporary help a bit,
by
zungmann
-
Tantillus
Have you tried pushing the filament manually ie by hand? Is it easy or hard?
My experiences 'jam' in the cold zone of the hotend can cause this problem.
by
zungmann
-
Tantillus
Bagi pecinta / fan RepRap atau 3D printing, barangakali belum lihat ini:
Sedikit bocoran, ada Mendel90 pake casing, mungkin bro dewa yg mau bikin printer dengan casing tertutup mau lihat juga
Ada juga alternatif low cost printer dari Shauki: QuadStrap, ada juga visual instruction bikin Morgan, RepRap desainnya Quentin Harley. Juga ada review hotend bagi yg mau beli atau bahkan bikin hotend
by
zungmann
-
Indonesia RepRap User Group
Ouch, I ordered for M5. I need M5 for my other parts. Can I just change the hole size without affecting the entire design? Thinking I just can drill it ...
by
zungmann
-
CoreXY Machines
Really good Jand.
I am now ordering the corner bracket from Misumi, 8 pcs for $8 and a pack of T-Nut. Certainly am interested, this will be my next build
by
zungmann
-
CoreXY Machines
Another update: second and third print. I set the travel speed to 140 mm/s, my stepper set to be 1/16 micro step. I know I am pushing my printer right now, see if she can handle it
On second print, there was big shift on XY, so I turned up the pot (clockwise) a bit. Also the result was not 10mm tall but 7.64mm so I recalibrated the Z.
On third print, there were some small shifts on first several
by
zungmann
-
Tantillus
oh ok
Saya curiga pake Marlin makanya nanya firmware dan suhu awal karena Marlin begitu biasanya, suhu ga naik, stepper ga jalan karena temperature ga kedetek.
by
zungmann
-
Indonesia RepRap User Group
OK, here what I found and did based on the feedbacks:
1. My motor shafts are not flat right now. Its not going to be easy now to make them flat, so will be my next to do, and lucky me they are not slipping. I watch them just stand still and the motor buzzing.
2. I tried various speed and so far the max speed it can keep up is 130mm/s. So I am lowering it to 120 to be safe. My motors are 0.9 deg/s
by
zungmann
-
Tantillus
how is it going now...?
by
zungmann
-
General
Update on my built. Now its built and wired. I have not placed the electronic inside because still testing it. Today just made the very first print. Its the famous calibration box 20mm. The problem seems to be that my X Y motors can not keep up the travel speed. 150 mm/s (I am using the KS profile supplied). So the next layers displaced far away from previous ones.
by
zungmann
-
Tantillus
Nambah lagi deh di galery. Dikujungi keponakan dan ingin diprintkan sesuatu, jadinya ngeprint ini: Squirrel dan Frog.
Keduanya diprint dengan PLA warna pink oleh Prusa Mendel, 3 perimeter/loop, speed 60mm/s infil dan 50mm/s perimeter, 20% infil.
Squirrel 0.25 mm/layer sedangkan Frog 0.2 mm/layer
by
zungmann
-
Indonesia RepRap User Group
Go go go Bro Dewa! Didukung deh dan didoain lancar dan jadi )
Printer metal frame seukuran itu kebayang berat. Untuk frame mungkin mau mempertimbangkan alu profile/t-slot, nanti bisa ditutup dengan alu sheet atau dibond/alucobod (bisa warna warni ) atau any flat stock ringan. Yang pake alu profile contohnya Ingentis (varian Tantillus yg ukuran besar).
Untuk rail, mungkin thread ini bisa ngasih
by
zungmann
-
Indonesia RepRap User Group
I just like your hotend, due to its compact size, can print higher temp and surely hope still good with pla. Waiting for it ...
Excellent work!
by
zungmann
-
General
Glad to see your progress. Looks really good. I guess its time to print the parts…
@Jand, would you share the STL of the printed part?
I already have the 20x20 alu profile, but still looking for the 3-way bracket. Getting from Europe will cost me a fortune (am in, Indonesia, South East Asia). I will try this: HBLCR5-B from Misumi.
by
zungmann
-
CoreXY Machines
To be fair with Sainsmart, I got replacement of the defective part. Just received it today.
by
zungmann
-
General
You are right Sublime, Z move in one direction only. I need to invert the logic to make the endstop work. The other thing is rewire the endstop cable. My switch somehow need to connect to (-) and (S) pins in the RAMPS. Now, all the axis move OK. Just need to calibrate. I will be working first on the Z wobble.
Attached pictures of my current state of build.
by
zungmann
-
Tantillus
I just recently ordered and received my package after several incidents/mistakes due to terrible communication.
My order was $150 and it was sent via express without additional charge. The obvious and annoying problem is they do not responsive, it took several days to respond to my emails and kind of loose track of conversations. Communication is very bad.
My order is two RAMPS Sets (Arduino, sh
by
zungmann
-
General
Well, after a long pause and small progress along the time. Now time to complete the build. Assembly more or less completed. I just got the electronic and now wiring and testing the movement. X and Y doing ok but the Z seems to wobble a lot.
Another thing is no Pronterface, if I hit Y or Z Home move the Z, but not really homing. I read a post saying it is a bug in the Marlin version, is it? Not s
by
zungmann
-
Tantillus
This is excellent printer. I like it. I have 12 40-cm pieces of T-Slot Alu Profile just laying around. So leaning toward to build similar printer using them. Same problem is no milling machine access. probably waiting for printed version. Been watching this thread. Any further update?
What short of connector/bracket do you use to connect the 3-way in the corners?
by
zungmann
-
CoreXY Machines